Checking Your KIT Packaging, System Requirements

Congratulations on your purchase of a Toshiba DVD-RAM drive and Kit. The following information will help you in the simple installation of your new DVD- RAM drive.

CHECKING YOUR KIT PACKAGING

Please unpack your DVD-RAM kit, and assure that you have the following items:

!Toshiba SD-W2002 DVD-RAM Drive

!Blank Media - Single Sided/Type 1 DVD-RAM

!CyberLink PowerDVD™ Software

!VOB InstantWrite Software CD

!DVD-RAM Installation Instructions (this manual)

!Quick Start Guide

!Mounting screws (4)

!IDE BUS cable

!DVD/CD sound cable

Additional items you may need that are not included in the kit are:

!Phillips Screwdriver

!Mounting hardware (i.e. some computer systems use mounting rails).

SYSTEM REQUIREMENTS

The DVD-RAM kit requires the following:

✔At least 55MB of free hard disk space

✔At least 32MB of RAM

✔*Pentium II processor at 266MHz or higher or....

*Celeron 300A processor or higher or....

*K6-2 processor at 300MHz or higher

✔Display card supporting DirectDraw

✔16-bit or better sound card

✔Microsoft™ Windows 95 or higher

✔Amplified stereo speakers

*These requirements are only required if you are using the CyberLink PowerDVD™ software. The SD-W2002 DVD-RAM will work as a CD-ROM and DVD-RAM when using a lower speed Pentium system.