COMPLETING INSTALLATION
After you have connected all the necessary cables, push the DVD-RAM com- pletely into the computer’s drive slot. Mount the drive per your computer’s in- structions using the screws included in your kit. If you are using other screws, assure that the screw length does not exceed 3±0.5mm (measured from outside surface of side or bottom of DVD-RAM to tip of screw). Replace the computer cover and all outer screws.
ATAPI CD/DVD Software Driver:
Toshiba’s DVD-RAM drives do not require any unique device drivers for Win- dows '95/'98/2000/NT. After installing your drive and re-booting, your system should recognize your drive. Win '95/'98/2000/NT operating systems support all Toshiba ATAPI CD-RW, CD-ROM, DVD-ROM and DVD-RAM drives natively.
VOB InstantWrite Software:
VOB’s InstantWrite software is used to record DVDs with your new DVD-RAM drive. Before installing VOB Software it is recommended that you visit VOB’s website to check for any software updates (www.vobinc.com). To install software insert the installation CD into your newly installed DVD-RAM. If “Autorun” is enabled on your system, the Installation window will appear automatically. If it does not appear, go to Windows Start menu, select “Run” and type d:\setup.exe (substitute the appropriate letter of your DVD-RAM drive for d:). From the Instal- lation window select Instant Write and follow the installation instructions that appear on your screen. For additional information on this software, please refer to the documentation found on the VOB “Instant Write” CD.
VOB InstantBackup Software:
VOB’s InstantBackup allows you to backup your valuable data to CD/DVD. Backup of selected files and folders or the complete hard drive is possible. Supports both incremental and random write-strategies.
CyberLink PowerDVD™ :
CyberLink PowerDVD™ is a high-quality, pure-software DVD player that brings high-quality movies and karaoke into your multimedia PC. You can playback high resolution DVD titles or MPEG-2 files with superb MPEG-2 video and Dolby AC-3 audio quality.
Before installing CyberLink software it is recommended that you visit CyberLink’s website to check for any software updates (www.gocyberlink.com). To install, insert CyberLink PowerDVD™ into your newly installed DVD-RAM. Go to Win- dows Start menu, select “Run” and type d:\setup.exe (substitute the appropri- ate letter of your DVD-RAM drive for d:). Follow the installation instructions on screen. For additional information on using this software, please refer to the PowerDVD™ Help file (if you have opened PowerDVD™ software, click “?”).