Philips HTS3541 MP3 player, EasyLink, Listen to radio, Play music, Switch on, Control devices

Button	Action
/	Select a preset radio station.
or
Alphanumeric
buttons

Navigation Search for a radio station. buttons (left/

right)

Navigation Fine tune a radio frequency. buttons (up/

down)

Press to stop the installation of radio stations.

BACK Press and hold to erase the preset radio station.

OPTIONS Manual:

1)Press OPTIONS.

2)Press / to select your preset. 3) Press OPTIONS again to store the radio station.

Automatic: Press and hold for three seconds to reinstall the radio stations.

Listen to radio

1 Press RADIO.

• To listen to a preset station, press or .

• To search for a radio station, and then listen, press Navigation buttons (left/ right).

2 Press +/- (Volume) to change the volume.

MP3 player

Connect your MP3 player to play your audio files or music.

What you need

•An MP3 player.

•A 3.5mm stereo audio cable.

Play music

1 Connect the MP3 player to the home theater as described in the Quick start guide.

2 Press AUDIO SOURCE repeatedly until 'MUSIC I-LINK' appears on the display panel.

3 Press the buttons on the MP3 player to select and play audio files or music.

EasyLink

The home theater supports Philips EasyLink, which uses the HDMI-CEC (Consumer Electronics Control) protocol. EasyLink- compliant devices that are connected through HDMI can be controlled by a single remote control.

Philips does not guarantee 100% interoperability with all HDMI-CEC devices.

What you need

•HDMI-CEC compliant devices.

•An HDMI connection between the connected devices.

Switch on

1 On the TV and other connected devices, turn on the HDMI-CEC operations. For details, see the manual of the TV or other devices.

2 Press (Home).

3 Select [Setup], and then press OK.

4 Select [EasyLink] > [EasyLink], and then press OK.

5 Select [On], and then press OK.

Control devices

Control the home theater and the other connected HDMI-CEC compliant devices with a single remote control.

21EN