HDMI audio
To hear an HDMI audio output from your TV, connect your home theater to the TV through an HDMI cable.
1
2
3
4 Select the following options, and then press OK:
•[Bitstream]: Enable bitstream output over HDMI.
•[Auto]: Automatically select the best supported audio format.
•[Off]: Disable audio from the TV.
Audio post processing
To select a predefined sound mode, enable audio post processing at the speaker (see 'Sound mode' on page 15).
1
2
3
Note
•• To play the original audio of the disc, select [Off].
Night mode
For quiet listening, decrease the volume of loud sounds when you play discs. Night mode is only available for
1
2
3
Restore sound mode settings
Restore the equalizer settings of all the sound modes to the default values.
1
2
3
Language
Select a language for the home menu, audio, and subtitles.
Home menu
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Preference] > [Menu language], and then press OK.
4 Select a menu language, and then press OK.
Disc audio
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Preference] > [Audio], and then press OK.
4 Select an audio language for discs, and then press OK.
Note
•• If your preferred disc language is not available, select [Others] from the list, and enter the
•• If you select a language that is not available on a disc, the home theater uses the default language of the disc.
EN 24