Step 2: Update the software
Caution
•• Before you connect the USB flash drive to your home theater, make sure that there is no disc in the disc compartment, and the disc compartment is closed.
1 Connect the USB flash drive to your home theater.
2 Switch your TV to the correct source for your home theater.
3 Press 
(Home), and then select [Setup].
4 Select [Advanced] > [Software Update] > [USB].
5 Follow the instructions on the TV to confirm the update.
»»When the software update is complete, the home theater automatically switches off and restarts. If it does not, disconnect the power cord for a few seconds, and then reconnect it.
Note
•• When the software update is in progress, do not turn off the power or remove the USB flash drive.
EN 28
