Philips HTS3541 user manual 1 2 3 Connectors, Setup, Front, Back connectors

Connect your speakers and subwoofer as described in the Quick start guide.

Press (Home) on your home theater remote control, and select [Setup] > [Audio] > [Speaker Setup].

Enter the distance for each speaker, and then listen to the test tones and change the volume. Experiment a little with the speaker positions to find the ideal setting.

Place the rear surround speakers to the left and right side of your seating position, either in line with it or slightly behind it. For best effect, point the speakers towards the seating position and place the speakers just above the ear level (when seated).

5 SUBWOOFER (subwoofer):

Place the subwoofer at least one meter to the left or right of the TV. Leave about ten centimeter clearance from the wall.

Connect

Connect your speakers and the subwoofer to your home theater as described in the quick start guide.

Setup

Set up your speakers through the speaker setup menu.

1

2

3

Connectors

Connect other devices to your home theater.

Front

A (USB)

Audio, video or picture input from a USB storage device.

BMUSIC iLINK

Audio input from an MP3 player.

Back connectors

AAC MAINS

Connect to the power supply.

BSPEAKERS

Connect to the supplied speakers and subwoofer.

CANTENNA FM 75

Signal input from an antenna, cable or satellite.

DAUDIO IN-AUX

Connect to an analog audio output on the TV or an analog device.

EVIDEO OUT

Connect to the composite video input on the TV.

FHDMI OUT (ARC)

Connect to the HDMI input on the TV.

GLAN

Connect to the LAN input on a broadband modem or router.

HDIGITAL IN-OPTICAL

Connect to an optical audio output on the TV or a digital device.

IDIGITAL IN-COAXIAL

Connect to a coaxial audio output on the TV or a digital device.

EN 10