Pioneer DV-610AV-S Problem Remedy, No audio, or audio is distorted, CD volume Malfunction

Page 55

Problem

Remedy

09

 

 

No picture/No color. • Incorrect video connections: Check that connections are correct and that plugs are inserted fully. Also check the video cable for damage.

TV/monitor or AV amplifier settings are incorrect: Check the instruction manual of the connected equipment.

The video output is set to progressive but your TV/monitor is not compatible with progressive scan: See page 12 for how to set to Interlace.

Screen is stretched or aspect • The TV Screen setting in the Initial Settings menu is incorrect.

does not change.See page 51 for how to set it correctly for your TV/monitor.

Picture disturbance during • This player is compatible with Macro-Vision System copy guard.

playback or the picture is Some discs include a copy prevention signal, and when this type of

dark.disc is played back, stripes etc., may appear on some sections of the picture depending on the TV. This is not a malfunction.

Due to the player’s copy protection circuits, connection of this device through a VCR or an AV selector may prevent recording or cause picture problems. This is not a malfunction.

Check whether the TV system is properly set (page 52).

No audio, or audio is distorted.

No audio is output during slow motion playback or when scanning discs other than audio CDs.

Some DVD discs do not output digital audio: Switch your amplifier to the player’s analog outputs.

Check that the disc is free from dust and dirt, and that it is not damaged (page 50).

Check that all interconnects are firmly inserted.

Check that the plugs and terminals are free of dirt, oxide, etc. and clean if necessary. Also check the cable for damage.

Make sure the player’s output is not connected to the amplifier’s phono (turntable) inputs.

Check your amplifier/receiver’s settings (volume, input function, speaker settings, etc.).

The analog audio is OK, but there appears to be no digital audio signal.

Make sure that the Digital Out setting is set to On (page 38).

Check that the Dolby Digital Out, DTS Out and MPEG Out settings (page 38) are suitable for your amplifier/receiver — check the instruction manual that came with your amplifier/receiver.

SACDs and some DVD-Audio discs do not output digital audio. Listen through the player’s analog audio outputs.

Noticeable difference in DVD • This is due to differences in the audio format and is not a

and CD volume.

malfunction.

 

 

55

En

Image 55
Contents DV-610AV-S      Operating Environment Important the Moulded Plug POWER-CORD Caution Contents Putting the batteries in the remote FeaturesBefore you start What’s in the boxDisc/content format playback compatibility Hints on installationDon’t DVD-R/-RW compatibility About DualDisc playbackCD-R/-RW compatibility DVD+R/+RW compatibilityDisplaying external subtitle files About MPEG-4 AACWindows Media Audio WMA compatibility About DivX videoDivX video compatibility About Windows Media Video WMVJpeg file compatibility PC-created disc compatibilityRed ConnectionsEasy connections To audio/video inputsConnecting using the S-Video 02 output Connecting using a Scart AV cableConnecting using the component video output Connecting the multichannel Analog outputs Connecting to an AV receiverTip Connecting the digital output Connecting using HdmiAbout Hdmi Front panel Controls and displaysUsing the remote control Remote controlUsing the on-screen displays Switching onGetting started Press Home Menu to exit the menu screen Press Home Menu and select ‘Initial Settings’Select ‘TV Screen’ from the ‘Video Output’ settings Select ‘OSD Language’ from the ‘Display’ settingsPress  OPEN/CLOSE to open the disc tray Load a disc Playing discs Play Basic playback controlsResume and Last Memory Button What it doesMenu DVD and DivX disc menusVideo CD/Super VCD PBC menus TOP MenuScanning discs Playing discsPlaying in slow motion Viewing a Jpeg slideshow Frame advance/frame reverseZoom Select a view option Browsing Discs with the Disc NavigatorSelect the thumbnail image for what you want to play Use the cursor buttons /// Enter to navigate Browsing Files with the Disc NavigatorSelect a repeat play option Using repeat playLooping a section of a disc To resume normal playback, select ‘Off’ from the menuSelect a random play option Using random playClear Creating a program listOther functions available from the program menu Repeat to build up a programPress Enter to start playback Searching a disc Switching subtitlesSelect a search mode Press Subtitle repeatedly to select a subtitle optionDisplaying disc information Switching audio language/ channelsSwitching camera angles Zooming the screenConnect your USB device Using the USB interfaceWith the player switched on, press DVD/USB USB playbackRecording specific tracks Recording all the tracksSelect 128 kpbs, 192 kbps or 320 kbps Select the bit rate transfer rateAudio DRC Audio Settings and Video Adjust menusAudio Settings menu Virtual SurroundMake settings using the /// Cursor buttons, and Enter Video Adjust menuUsing the Initial Settings menu Initial Settings menuSetting Option What it means Digital Audio Out settingsSetting Video Output settingsTV Screen Language settings Stereo Display settingsOptions settings Setting Option What it meansSetting/changing the Country/Area code Setting/changing the Parental LockRegistering a new password Changing your passwordDisplaying your DivX VOD Registration code About DivX VOD contentPlaying DivX VOD content DTS DownmixSpeakers settings DVD-RW VR DVDDTS MpegMPEG-4 AAC About the Hdmi audio output settingsDisc audio format Hdmi Out setting CD/MP3/WMAHdmi Components specificationHdmi output with DVD-Audio and Sacd sources Example Disc formatUse the /cursor up/down to select a speaker Speaker DistanceUse the / cursor up/down buttons to select a speaker Default settings L/R Large C Large SL SR LargeSW OnTaking care of your player and discs Additional informationMoving the player Cleaning the pickup lensScreen sizes and disc formats CondensationStandard TV users Setting the TV systemIncompatible disc region number Can’t play Resetting the playerSelecting languages using Language code list DVD-Video regionsProblem TroubleshootingRemedy CD volume Malfunction Problem RemedyNo audio, or audio is distorted Make sure that Linear PCM Out is set to Down Sample Off AudioProperly Press Audio to change the soundtrack No multichannel Hdmi Hdmi troubleshootingProblemRemedy No Hdmi video outputDSD USB troubleshootingGlossary DRMCD Sacd ExifPBC PCMCountry/Area, Country/Area code, Country/Area code letter Country/Area code listSpecifications Pioneer Corporation
Related manuals
Manual 62 pages 60.57 Kb

DV-610AV-S specifications

The Pioneer DV-610AV-S is a versatile and well-engineered DVD player that has made a name for itself in the realm of home entertainment. Designed to provide exceptional audio and video performance, this unit is packed with features that cater to both casual viewers and serious audiophiles alike.

At the core of the DV-610AV-S is its ability to play a wide variety of formats. It supports DVD, DVD-R/RW, CD, CD-R/RW, and even MP3 and JPEG file playback. This flexibility means users can enjoy a broad range of content, whether they’re watching movies, listening to music, or viewing photo slideshows. Additionally, it also supports DivX and MPEG-4 video formats, making it suitable for modern digital media consumption.

One of the standout features of the DV-610AV-S is its advanced video processing capabilities. The player utilizes a high-quality video output that enhances standard-definition content, providing clearer and more vibrant images. With its 1080p upscaling, it elevates DVD content to near high-definition quality, allowing for a better viewing experience on modern HDTVs. The unit also includes various video modes, including cinema and auto, to optimize picture quality based on the type of content being played.

Audio performance is equally noteworthy, as the DV-610AV-S is equipped with multiple audio output options. It includes Dolby Digital and DTS decoding, ensuring that the sound quality is rich and immersive. The unit also features a digital coaxial output for those who want to connect it to a surround sound system, making it a perfect addition to home theater setups.

In terms of connectivity, the Pioneer DV-610AV-S shines with its diverse options. It offers both composite and component video outputs, along with standard stereo audio outputs. This versatility ensures that it can integrate seamlessly into various entertainment systems.

The sleek silver finish of the DV-610AV-S adds a touch of elegance, making it an attractive addition to any living room. Its user-friendly interface and remote control functionality simplify navigation through menus and setup options, enhancing the overall user experience.

Overall, the Pioneer DV-610AV-S is a well-rounded DVD player that combines excellent playback capabilities with modern technology, making it an ideal choice for anyone looking to upgrade their home entertainment setup. With its robust feature set and reliable performance, it continues to be a popular choice among consumers.