Pioneer DV-610AV-S Audio, Make sure that Linear PCM Out is set to Down Sample Off

Page 56

09

Problem

Remedy

 

Cannot play multi-channel • Make sure that Audio Output Mode is set to 5.1 Channel

 

audio.

(page 44).

•Check that the Dolby Digital Out, DTS Out and MPEG Out settings (page 38) are suitable for your amplifier/receiver — check the instruction manual that came with your amplifier/receiver.

•DVD-Audio and SACDs do not output multichannel digital audio. Listen through the player’s analog outputs.

•Check that the settings in the Speaker Installation screen are correct (page 49).

•Check the audio options available from the disc menu.

Cannot listen to high-sampling rate audio through the digital output.

•Make sure that Linear PCM Out is set to Down Sample Off (page 38).

•As a copy-protection measure, some DVDs do not output 96 kHz audio. In this case, even if set to Down Sample Off, the player automatically outputs the audio at 48 kHz. This is not a malfunction.

Cannot output 192 kHz or • The player does not output digital audio at these sampling rates.

176.4kHz digital audio. The digital output is automatically downsampled.

Cannot output 96 kHz or

• Check that Linear PCM Out is set to Down Sample Off

88.2 kHz digital audio.

(page 38).

 

• Some discs are digital copy protected and do not output high

 

sampling rate digital audio. In this case the output is automatically

 

downsampled.

No DTS audio output. • If this unit is connected to a non-DTS compatible amplifier or decoder using a digital audio cable, set DTS Out to DTS > PCM (page 38). If you do not do this, noise will be output when you play a DTS disc.

•If this unit is connected to a DTS-compatible amplifier or decoder using a digital audio cable, check the amplifier settings, and that the cable is properly connected.

Audio mix does not sound right or sounds incomplete (for example, inaudible dialog).

•Make sure that Audio Output Mode is set to 2 Channel if you’ve connected to the stereo inputs on your amplifier or TV.

The audio recorded on a

• If the audio is switched to [2] when playing a Super VCD that

Super VCD disc is not output

contains only one stereo soundtrack, there may be no sound at all.

properly.

Press AUDIO to change the soundtrack.

Can’t hear effect of Virtual • Virtual Surround does not work with SACD or DVD-Audio.

Surround.• The Virtual Surround effect is only output through the AUDIO OUT (5.1ch) FRONT L/R analog audio outputs.

•Make sure that Audio Output Mode is set to 2 Channel (page 44).

•The effectiveness of Virtual Surround varies with the disc.

56

En

Page 55 Page 57
Image 56
Page 55 Page 57
Contents DV-610AV-S  Operating Environment     POWER-CORD Caution  Important the Moulded PlugContents Features Before you startWhat’s in the box Putting the batteries in the remoteDon’t Hints on installationDisc/content format playback compatibility About DualDisc playback CD-R/-RW compatibilityDVD+R/+RW compatibility DVD-R/-RW compatibilityAbout MPEG-4 AAC Windows Media Audio WMA compatibilityAbout DivX video Displaying external subtitle filesAbout Windows Media Video WMV Jpeg file compatibilityPC-created disc compatibility DivX video compatibilityConnections Easy connectionsTo audio/video inputs RedConnecting using a Scart AV cable Connecting using the S-Video 02 outputConnecting using the component video output Tip Connecting to an AV receiverConnecting the multichannel Analog outputs Connecting using Hdmi Connecting the digital outputAbout Hdmi Controls and displays Front panelRemote control Using the remote controlGetting started Switching onUsing the on-screen displays Press Home Menu and select ‘Initial Settings’ Select ‘TV Screen’ from the ‘Video Output’ settingsSelect ‘OSD Language’ from the ‘Display’ settings Press Home Menu to exit the menu screenPlaying discs Press  OPEN/CLOSE to open the disc tray Load a discBasic playback controls Resume and Last MemoryButton What it does  PlayDVD and DivX disc menus Video CD/Super VCD PBC menusTOP Menu MenuPlaying in slow motion Playing discsScanning discs Zoom Frame advance/frame reverseViewing a Jpeg slideshow Select the thumbnail image for what you want to play Browsing Discs with the Disc NavigatorSelect a view option Browsing Files with the Disc Navigator Use the cursor buttons /// Enter to navigateUsing repeat play Looping a section of a discTo resume normal playback, select ‘Off’ from the menu Select a repeat play optionUsing random play Select a random play optionCreating a program list Other functions available from the program menuRepeat to build up a program ClearSearching a disc Switching subtitles Select a search modePress Subtitle repeatedly to select a subtitle option Press Enter to start playbackSwitching audio language/ channels Switching camera anglesZooming the screen Displaying disc informationUsing the USB interface With the player switched on, press DVD/USBUSB playback Connect your USB deviceRecording all the tracks Recording specific tracksSelect the bit rate transfer rate Select 128 kpbs, 192 kbps or 320 kbpsAudio Settings and Video Adjust menus Audio Settings menuVirtual Surround Audio DRCVideo Adjust menu Make settings using the /// Cursor buttons, and EnterInitial Settings menu Using the Initial Settings menuDigital Audio Out settings Setting Option What it meansTV Screen Video Output settingsSetting Language settings Display settings Options settingsSetting Option What it means StereoSetting/changing the Parental Lock Registering a new passwordChanging your password Setting/changing the Country/Area codeAbout DivX VOD content Playing DivX VOD contentDTS Downmix Displaying your DivX VOD Registration codeSpeakers settings DVD DTSMpeg DVD-RW VRAbout the Hdmi audio output settings Disc audio format Hdmi Out settingCD/MP3/WMA MPEG-4 AACComponents specification Hdmi output with DVD-Audio and Sacd sourcesExample Disc format HdmiSpeaker Distance Use the /cursor up/down to select a speakerDefault settings L/R Large C Large SL SR LargeSW On Use the / cursor up/down buttons to select a speakerAdditional information Taking care of your player and discsCleaning the pickup lens Screen sizes and disc formatsCondensation Moving the playerSetting the TV system Standard TV usersResetting the player Selecting languages using Language code listDVD-Video regions Incompatible disc region number Can’t playRemedy TroubleshootingProblem No audio, or audio is distorted Problem RemedyCD volume Malfunction Properly Press Audio to change the soundtrack AudioMake sure that Linear PCM Out is set to Down Sample Off Hdmi troubleshooting ProblemRemedyNo Hdmi video output No multichannel HdmiUSB troubleshooting GlossaryDRM DSDExif PBCPCM CD SacdCountry/Area code list Country/Area, Country/Area code, Country/Area code letterSpecifications Pioneer Corporation
Related manuals
Manual 62 pages 60.57 Kb

DV-610AV-S specifications

The Pioneer DV-610AV-S is a versatile and well-engineered DVD player that has made a name for itself in the realm of home entertainment. Designed to provide exceptional audio and video performance, this unit is packed with features that cater to both casual viewers and serious audiophiles alike.

At the core of the DV-610AV-S is its ability to play a wide variety of formats. It supports DVD, DVD-R/RW, CD, CD-R/RW, and even MP3 and JPEG file playback. This flexibility means users can enjoy a broad range of content, whether they’re watching movies, listening to music, or viewing photo slideshows. Additionally, it also supports DivX and MPEG-4 video formats, making it suitable for modern digital media consumption.

One of the standout features of the DV-610AV-S is its advanced video processing capabilities. The player utilizes a high-quality video output that enhances standard-definition content, providing clearer and more vibrant images. With its 1080p upscaling, it elevates DVD content to near high-definition quality, allowing for a better viewing experience on modern HDTVs. The unit also includes various video modes, including cinema and auto, to optimize picture quality based on the type of content being played.

Audio performance is equally noteworthy, as the DV-610AV-S is equipped with multiple audio output options. It includes Dolby Digital and DTS decoding, ensuring that the sound quality is rich and immersive. The unit also features a digital coaxial output for those who want to connect it to a surround sound system, making it a perfect addition to home theater setups.

In terms of connectivity, the Pioneer DV-610AV-S shines with its diverse options. It offers both composite and component video outputs, along with standard stereo audio outputs. This versatility ensures that it can integrate seamlessly into various entertainment systems.

The sleek silver finish of the DV-610AV-S adds a touch of elegance, making it an attractive addition to any living room. Its user-friendly interface and remote control functionality simplify navigation through menus and setup options, enhancing the overall user experience.

Overall, the Pioneer DV-610AV-S is a well-rounded DVD player that combines excellent playback capabilities with modern technology, making it an ideal choice for anyone looking to upgrade their home entertainment setup. With its robust feature set and reliable performance, it continues to be a popular choice among consumers.
Top Page Image Contents