Getting started | 04 |
Basic playback controls
The table below shows the basic controls on the remote for playing discs. The following chapter covers other playback features in more detail.
Button What it does
Starts playback.
If the display shows RESUME or LAST MEM playback starts from the resume or last memory point (see also Resume and Last Memory below.)
Pauses a disc that’s playing, or restarts a paused disc.
Stops playback.
See also Resume and Last Memory below.
Press to start fast reverse scanning. (remote Press (play) to resume normal
only) playback.
Press to start fast forward scanning. (remote Press (play) to resume normal
only) playback.
Skips to the start of the current track, title or chapter, then to previous tracks/titles/chapters.
Skips to the next track, title or chapter.
Button | What it does |
Numbers | Use to enter a title/chapter/track |
(remote | number. Press ENTER to select. |
only) | • If the disc is stopped, playback |
| starts from the selected title (for |
| DVD), group (for |
| track (for CD/SACD/Video CD). |
| • If the disc is playing, playback |
| jumps to the start of the selected |
| title (VR mode |
| |
| SACD/CD/Video CD). |
| *within the current group |
|
|
Resume and Last Memory
With the exception of
If the disc tray is not opened, the next time you start playback the display shows RESUME and playback resumes from the resume point. (If you want to clear the resume point, press (stop) while RESUME is displayed.)
With DVDs and Video CDs, if you take the disc out of the player after stopping playback, the last play position is stored in memory. If the next disc you load is the same one, the display shows LAST MEM and playback will resume. For
Note
•The Last Memory function doesn’t work with VR format
21
En