Pioneer DV-566K-s Basic playback controls, Resume and Last Memory, Front panel controls

04Getting started

Basic playback controls

The table below shows the basic controls on the remote for playing discs. The following chapter covers more playback features in more detail.

Button	What it does
	Starts playback.
	DVD and Video CD: If the display
	shows RESUME or LAST MEM
	playback starts from the resume or
	last memory point (see also
	Resume and Last Memory below.)
	Pauses a disc that’s playing, or
	restarts a paused disc.
	Stops playback.
	DVD and Video CD: Display shows
	RESUME. Press (stop) again to
	cancel the resume function. (See
	also Resume and Last Memory
	below.)
	Press to start fast reverse scan-
	ning. Press	(play) to resume
	normal playback.
	Press to start fast forward scan-
	ning. Press	(play) to resume
	normal playback.

Skips to the start of the current track or chapter, then to previous tracks/chapters.

Skips to the next track or chapter.

Numbers Use to enter a title/track number. Press ENTER to select (or wait a few seconds).

•If the disc is stopped, playback starts from the selected title (for DVD) or track number (for CD/ Video CD/Super VCD/MP3 ).

•If the disc is playing, playback jumps to the start of the selected chapter or track.

28

Front panel controls

The (play), (stop), and (pause) buttons on the front panel work in exactly the same way as their remote control equivalents.

The combined scan/skip buttons on the front

panel ( and ) work slightly differently from the remote buttons. Press and hold for fast scan; press for track/chapter skip.

See Front panel on page 17 for the location and description of all the front panel controls for your model.

•You may find with some DVD discs that some playback controls don’t work in certain parts of the disc. This is not a malfunction.

•Track skip and number buttons for track selection do not work with unfinalized CD- R/RW audio discs.

Resume and Last Memory

When you stop playback of a DVD or Video CD disc, RESUME is shown in the display indi- cating that you can resume playback again from that point.

If the disc tray is not opened, the next time you start playback the display shows RESUME and playback resumes from the resume point.

For DVD discs only: If you take the disc out of the player, the play position is stored in memory. When you load the disc next time, the display shows LAST MEM and you can resume playback (this works for up to five discs).

If you want to clear the resume/last memory point, press (stop) while RESUME or LAST MEM is displayed.

En