Pioneer DV-566K-s Initial Settings menu, Dolby Digital Out, 96kHz PCM Out, DTS Out, Mpeg Out

09Initial Settings menu

Dolby Digital Out

You only need to make this setting if you connected this player to an AV receiver (or other component) using one of the digital outputs.

• Default setting: Dolby Digital

Initial Settings
Digital Audio Out	Digital Out
		Dolby Digital
Video Output	Dolby Digital Out	Dolby Digital > PCM
Language	DTS Out
Display	96kHz PCM Out
Options	MPEG Out

96kHz PCM Out

You only need to make this setting if you connected this player to an AV receiver (or other component) using one of the digital outputs.

• Default setting: 96kHz>48kHz

Initial Settings
Digital Audio Out	Digital Out	96kHz > 48kHz
Video Output	Dolby Digital Out	96kHz
Language	DTS Out
Display	96kHz PCM Out
Options	MPEG Out

If your AV receiver (or other connected component) is Dolby Digital compatible, set to Dolby Digital, otherwise set to Dolby Digital > PCM.

DTS Out

You only need to make this setting if you connected this player to an AV receiver (or other component) using one of the digital outputs.

• Default setting: DTS

Initial Settings
Digital Audio Out	Digital Out	DTS
Video Output	Dolby Digital Out	Off
Language	DTS Out
Display	96kHz PCM Out
Options	MPEG Out

If your AV receiver (or other connected component) has a built-in DTS decoder, set this to DTS, otherwise set to Off. Check the manual that came with the other component if you’re unsure whether it is DTS compatible.

•If you set to DTS with a non-DTS compat- ible amplifier, noise will be output when you play a DTS disc.

52

If your AV receiver (or other connected component) is compatible with high sampling rates (96 kHz), set this to 96kHz, otherwise set it to 96kHz>48kHz (96 kHz audio is converted to a more compatible 48 kHz). Check the manual that came with the other component if you’re unsure whether it is 96 kHz compatible.

MPEG Out

You only need to make this setting if you connected this player to an AV receiver (or other component) using one of the digital outputs.

• Default setting: MPEG > PCM

Initial Settings
Digital Audio Out	Digital Out	MPEG
Video Output	Dolby Digital Out	MPEG > PCM
Language	DTS Out
Display	96kHz PCM Out
Options	MPEG Out

If your AV receiver (or other connected component) is compatible with MPEG audio, set this to MPEG, otherwise set it to MPEG > PCM (MPEG audio is converted to more compatible PCM audio). Check the manual that came with the other component if you’re unsure whether it is MPEG audio compatible.

En