Pioneer DV-566K-s Picture disturbance during playback or the picture is dark, DVD and CD volume

Additional information 10

ProblemRemedy

Screen is stretched or • The TV Screen setting in the Initial Settings menu is incorrect. See aspect does not change. page 63 for how to set it correctly for your TV/monitor.

•If your TV/monitor is connected using an S-video cable, try changing the S-Video Out setting (page 54).

Picture disturbance during playback or the picture is dark.

•This player is compatible with Macro-Vision System copy guard. Some discs include a copy prevention signal, and when this type of disc is played back, stripes etc., may appear on some sections of the picture depending on the TV. This is not a malfunction.

•Due to the player’s copy protection circuits, connection of this device through a VCR or an AV selector may prevent recording or cause picture problems. This is not a malfunction.

•The TV system may be set inappropriately. See Setting the TV System on page 71.

No audio, or audio is distorted.

•No audio is output during slow motion playback or when scanning discs other than audio CDs

•Some DVD discs do not output digital audio: Switch your amplifier to the player's analog outputs.

•Check that the disc is free from dust and dirt, and that it is not damaged (page 61).

•Check that all interconnects are firmly inserted.

•Check that the plugs and terminals are free of dirt, oxide, etc. and clean if necessary. Also check the cable for damage.

•Make sure the player's output is not connected to the amplifier's phono (turntable) inputs.

•Check your amplifier/receiver’s settings (volume, input function, speaker settings, etc.).

The analog audio is OK, but there appears to be no digital audio signal.

•Make sure that the Digital Out setting is set to On (page 51).

•Check that the Dolby Digital, DTS and MPEG out settings (page 52) are suitable for your amplifier/receiver—check the instruction manual that came with your amplifier/receiver.

Noticeable difference in • This is due to differences in the audio format and is not a

DVD and CD volume.	malfunction.
Cannot play multi-	• Check that the Dolby Digital, DTS and MPEG Out settings (page 52)
channel audio	are suitable for your amplifier/receiver—check the instruction manual
	that came with your amplifier/receiver.
	• Check the audio options available from the disc menu.

Cannot listen to high- sampling rate audio through the digital output.

•Make sure that 96kHz PCM Out is set to 96kHz (page 52).

•As a copy-protection measure, some DVDs do not output 96kHz audio. In this case, even if set to 96kHz, the player automatically outputs the audio at 48 kHz. This is not a malfunction.

73

En