Pioneer DV-989AVi-S Channel Level, Move the cursor left to go back to, Speaker Distance screen

Initial Settings menu 08

•The center speaker (C) and subwoofer (SW) can be set from –2 m to +2 m rela- tive to the front left/right speakers.

•Surround left/right (LS/RS) speakers can be set from –6 m to +2 m relative to the front left/right speakers.

4 Move the cursor left to go back to the

speaker list if you want to modify another

Initial Settings

Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup

Auto

L0.0dB

C 0.0dB

R 0.0dB RS 0.0dB

LS 0.0dB SW 0.0dB

speaker, or press ENTER to exit the

Speaker Distance screen.

•Speaker Distance settings do not affect SACD playback.

Channel Level

• Default setting: Fix

You can set the individual channel levels between –6dB and +6dB in 0.5 dB incre- ments using the test tone output as a guide to set the correct levels. Adjust the levels until the output level from all channels sounds the same from your usual listening position. Note that Audio Output Mode (page 71) must be set to 5.1 Channel in order to use the test tone.

Automatic: Select Auto to start the test tone output. No sound will be heard from the subwoofer.

You only need to make this setting if you connected this player to your amplifier using the 5.1 channel analog outputs.

These settings do not affect any digital audio output.

Initial Settings

Initial Settings

Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup

Auto

L0.0dB

C 0.0dB

R 0.0dB RS 0.0dB

LS 0.0dB SW 0.0dB

Digital Audio Out	Audio Output Mode	Fix
Video Output	Speaker Installation	Variable
Language	Speaker Distance
Display	Channel Level
Options
Speakers
i.LINK Setup

When set to Fix, the level of each of the 5.1 channel analog outputs is fixed. Choose Vari- able if you want to adjust the relative levels to balance the surround sound better for your listening room.

As the test tone plays through each speaker in turn, it is highlighted on-screen. Use the Joystick (up/down) to adjust the channel output level of the current speaker. Move the cursor left to exit the test tone sequence, or ENTER to save the settings and exit the channel level setting screen.

Manual: Use the Joystick to move the cursor up/down to select a speaker.

Initial Settings

Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup

Auto

L0.0dB

C 0.0dB

R 0.0dB RS 0.0dB

LS 0.0dB SW 0.0dB

73

En