Pioneer DV-989AVi-S operating instructions Link Setup, Connections Setup, Audio Out

Page 74

08Initial Settings menu

Move the cursor right (or press ENTER) then use the Joystick (up/down) to set the channel output level.

Change this setting to Off if the i.LINK inter- face is still connected but you need to use one of the other outputs. Changing this setting to Off does not affect i.LINK thru data (i.e., if this

Initial Settings

Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup

Auto

L0.0dB

C 0.0dB

R 0.0dB RS 0.0dB

LS 0.0dB SW 0.0dB

player is between two other i.LINK compo- nents, it will still pass data between them).

Set back to On (i.LINK-ready) to be able to use the i.LINK interface.

Connections Setup

To turn the test tone on/off for an individual speaker, move the cursor right. The test tone continues playing even when you select a different speaker.

You only need to make this setting if you connected this player to other equipment using the i.LINK interface.

Initial Settings

Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup

Auto

L0.0dB

C 0.0dB

R 0.0dB RS 0.0dB

LS 0.0dB SW 0.0dB

Initial Settings

 

 

Digital Audio Out

Audio Out

VSX-49TXi

Video Output

Connections Setup

VSX-AX10i

Language

Auto Select Play

DV-47Ai

Display

DVD-Audio Out

 

Options

 

 

Speakers

 

 

i.LINK Setup

 

 

To save the settings and exit, press ENTER with the channel level field highlighted (as shown above).

The subwoofer output will sound quite low compared to the other speakers.

i.LINK Setup

Audio Out

• Default setting: On

You only need to make this setting if you connected this player to other equipment using the i.LINK interface.

Initial Settings

 

 

Digital Audio Out

Audio Out

On

Video Output

Connections Setup

Off

Language

Auto Select Play

 

Display

DVD-Audio Out

 

Options

 

 

Speakers

 

 

i.LINK Setup

 

 

 

 

 

74

This screen shows the equipment connected using the i.LINK interface.

Components which are able to receive

i.LINK Audio are shown in black (an i.LINK receiver, for example); those which can’t (a DV camcorder, for example) are shown in gray. If the player can’t display the name of a component, ‘****’ is shown; if the name can’t be determined, Unknown is displayed.

Select the component that you want to set up the audio output formats for.

Initial Settings

 

 

Digital Audio Out

Connections Setup

 

Video Output

VSX-49TXi : Pioneer

Language

 

 

Display

DolbyDigital

PCM

Options

DTS

DTS

Speakers

MPEG

MPEG

i.LINK Setup

 

 

 

 

 

This screen shows the output settings for Dolby Digital, DTS and MPEG audio. Depending on the other component, these may be configured automatically. If this

En

Image 74
Contents DV-989AVi-GDV-989AVi-S Class Laser Product POWER-CORD Caution Operating EnvironmentContents Initial Settings menu Audio Settings menuVideo Settings menu Video AdjustBefore you start Chapter FeaturesBefore you start Before you start Before you start What’s in the box Putting the batteries in the remote controlUsing the remote control Super Audio CD General disc compatibilityCD-R/RW compatibility Photo CD, DVD-RAM, DVD-ROM, CDPC Created Disc Compatibility DVD-R/RW CompatibilityCompressed Audio Compatibility CDs, SACDs and Video CD/Super VCDs are divided into tracks Before you start Titles, chapters, groups and tracksDVD-Video regions Rear panel Connecting upConnecting up Chapter Component Video OUT Connecting upEasy connections 11 D1/D2 Video OUT Except Australian modelUsing other types of video output Connecting using an S-Video outputConnecting using the D1/D2 video output Connecting for multichannel surround soundConnecting using the component video output Connecting using the multichannel analog outputs Connecting using a digital audio outputDigital Optical Connecting using i.LINK Connector AV receiverTo connect components for two-way commu- nication About i.LINKCreating an i.LINK network Connecting using Hdmi HdmiAbout Hdmi Control Front panel Controls and displaysControls and displays Chapter OPEN/CLOSE Controls and displaysAbout progressive scan video GRP PartPrgsve TitleControls and displays Remote control Subtitle JOG JOG ModeAngle TOP MenuGetting Started Setting the TV SystemSwitching on Getting Started ChapterGetting Started Let’s Get StartedHome Display/exit the on-screen dis Using the on-screen displaysPress Enter again to finish setting up Menu playOn-screen display OSD appears Getting Started Setting up with the Setup NavigatorSelect ‘Setup Navigator’ Select a DVD languageDid you connect this player to an AV receiver? Congratulations, setup is complete Press OPEN/CLOSE to open the disc tray Load a disc Getting Started Playing discsBasic playback controls Press play to start playbackDVD disc menus Front panel controlsVideo CD/Super VCD PBC menus Displays the PBC menuWhy won’t the disc I loaded play? Disc may have been illegally copiedWhy does the volume level seem lower during Sacd playback? Introduction Playing discsPlaying discs Chapter Scanning discs To resume normal playback, press playDuring playback, press Pause Press and hold Until Playing discs Using the Multi DialPlaying in slow motion Press repeatedly to change the slow motion speedPlaying discs Frame advance/frame reverse Looping a section of a discPlaying discs Using repeat play Using random playRandom Title Random Chapter Random Off Creating a program listSelect a random play option Random Group Random Track Random OffSelect ‘Create/Edit’ from the list of program options To play the program list, press play Editing a program listRepeat to build up a program List Select a program play function Searching a discOther functions available from the program menu Press Enter to start playback Switching subtitlesSwitching the DVD audio language Press Subtitle repeatedly to select a subtitle optionSwitching camera angles Switching DVD-RW audio channelsSwitching DVD-Audio audio channels Displaying disc informationCD and Video CD Displays DVD-RW displaysSacd displays During PBC playback onlyDefault setting Off Audio Settings menuAudio Settings menu Chapter Audio DRCHi-Bit Audio Settings menuThere are four settings, plus Off Virtual SurroundChannel Level Speaker Distance Video Adjust Video Settings menuVideo Settings menu Chapter Creating your own presetsVideo Settings menu Adjust the picture quality settingsVideo Settings menu Using the Initial Settings Digital Audio Out settings Menu Initial Settings menuInitial Settings menu Chapter Default setting OnDTS Out Initial Settings menuDolby Digital Out Linear PCM OutTV Screen Video Output settingsMpeg Out Component OutStill Picture Language settingsVideo Out Audio LanguageSubtitle Language Auto LanguageDisplay settings Background Registering a new passwordOptions Screen SaverSelect ‘Password Change’ Changing your passwordSetting/changing the Parental Lock level Use number buttons to enter your password, then press EnterBonus Group Setting/changing the Country/Area codeYou may also want to refer to the Country/Area code list on Select a new levelDefault setting DVD-Audio DVD Playback ModeDefault setting Single Auto Disc MenuSacd Playback Hdmi SettingsDefault setting 2ch Area Colour ResolutionAspect Ratio Video Memory Default setting PCM PlaybackCD Playback AudioSpeakers Audio Output ModeSpeaker Installation DTS DownmixL and R speakers are paired you can’t set them differently Default setting all speakers 3 mSpeaker Distance Move the cursor left to go back to Speaker Distance settings do not affect Sacd playbackChannel Level Speaker Distance screenAudio Out Link SetupConnections Setup DVD-Audio Out Default setting 5.1 ChannelAuto Select Play Taking care of your player and discs Additional informationAdditional information Chapter Additional information Widescreen TV users Resetting the playerScreen sizes and disc formats Standard TV usersAdditional information About the audio output settings DTS CDDTS CD Additional information About the Hdmi output settingsDTS DTS*2Hdmi Ver .1 DVD-Audio Hdmi output with DVD-Audio sourcesChannel compatible*1 Hdmi Ver .1 Incompatible withAdditional information About the i.LINK output settings MpegLanguage Language code letter, Language code Additional information Language code listCountry/Area code list Country/Area, Country/Area code, Country/Area code letterGlossary Mpeg audio Dynamic rangeFile extension LinkSampling frequency Pqls Precision Quartz Lock System rate controlProgressive scan video Slideshow DVD, Video CD/Super VCDDisc won’t play or is automatically ejected after loading Additional information TroubleshootingGeneral DVD/CD/Video CD/Super VCD player Listen through the player’s analog audio outputs Amplifier/receiverSACDs and some DVD-Audio discs do not output digital audio This is due to differences in the audio format and is not aDialog Check that Linear PCM Out is set to Down Sample OffRight or sounds incomplete Effectiveness of TruSurround varies with the discIsn’t damaged Hdmi troubleshootingBandwidth Digital Content Protection Hdcp Be made with components compatible with both DVI and HighOn page 68 to change the Hdmi resolution Make sure the resolution on this player matches thatComponent you have connected using HDMI. See Hdmi Settings Link troubleshooting Output Mode is set to 5.1 Channel see Audio Output Mode onLINK-related messages Link CheckAdditional information Specifications Pioneer Corporation