Pioneer DV-989AVi-S Auto Select Play, DVD-Audio Out, Default setting 5.1 Channel

Initial Settings menu 08

player can’t determine the appropriate settings, the defaults are Dolby Digital, DTS and PCM. If you need to change the settings, move the cursor right and make the new setting.

Auto Select Play

• Default setting: Off

You only need to make this setting if you connected this player to other equipment using the i.LINK interface.

Initial Settings
Digital Audio Out	Audio Out	Off
Video Output	Connections Setup	VSX-49TXi
Language	Auto Select Play	VSX-AX10i
Display	DVD-Audio Out
Options
Speakers
i.LINK Setup

Using this setting you can specify up to five receivers to automatically switch input func- tion to this player when you start playback of a disc. Highlight a receiver from the list and press ENTER.

The most recently selected component is marked with a orange box ( ). The i.LINK output when playing Dolby Digital, DTS or MPEG discs will be as set for this component (see also Connections Setup above).

Select Off to reset all the settings.

When the i.LINK connections are changed, the following screen appears.

Initial Settings
Digital Audio Out	Audio Out	Off
Video Output	Connections Setup	VSX-49TXi
Language	Connections were changed
	Auto Select Play	VSA-AX10
Display	and thus updated.
	DVD-Audio Out
Options
Speakers			ENTER
i.LINK Setup

•Whether a receiver from the list has been selected or not, this player will start play- back when you change the input function of the receiver to this player.

•Note that some AV receivers may not be compatible with this feature.

DVD-Audio Out

• Default setting: 5.1 Channel

You only need to make this setting if you connected this player to other equipment using the i.LINK interface.

Initial Settings
Digital Audio Out	Audio Out	2 Channel
Video Output	Connections Setup	5.1 Channel
Language	Auto Select Play
Display	DVD-Audio Out
Options
Speakers
i.LINK Setup

Set this to 5.1 Channel to enjoy surround sound when playing multichannel discs.

To downmix a multichannel source when using the i.LINK connection, set to 2 Channel for stereo output.

•When set to 5.1 Channel, you’ll only get sound from all speakers when playing multichannel discs.

•Some DVD-Audio discs don’t allow down- mixing of audio. These discs always output multi-channel audio regardless of the setting made here.

Press ENTER to return to the menu screen.

75

En