![](/images/new-backgrounds/1251770/25177031x1.webp)
02Connecting up
Connecting the digital output
This player has both optical and
Depending on the capabilities of your AV receiver, you might have to set up this player to output only digital audio in a compatible format. See Digital Audio Out settings on page 40 and refer to the operating instructions that came with your AV receiver.
Note that SACD audio is not output through these jacks, so this connection should be in addition to, rather than instead of, a 5.1 channel analog connection.
•Connect one of the DIGITAL AUDIO OUT jacks on this player to a digital input on your AV receiver.
DIGITAL IN (OPTICAL)
AV receiver | DIGITAL IN |
| (COAXIAL) |
OPTICAL COAXIAL
DIGITAL AUDIO OUT
For an optical connection, use an optical cable (not supplied) to connect the OPTICAL DIGITAL AUDIO OUT jack to an optical input on your AV receiver.
For a coaxial connection, use a coaxial cable (similar to the supplied video cable) to connect the COAXIAL DIGITAL AUDIO OUT jack to a coaxial input on your AV receiver.
Connecting using HDMI
If you have a HDMI equipped monitor or display, you can connect it to this player using a commercially available HDMI cable.
The HDMI connector outputs uncompressed digital video, as well as almost every kind of digital audio that the player is compatible with, including
1Use an HDMI cable to connect the HDMI OUT interconnect on this player to an HDMI interconnect on a
HDMI
connector
| L | SW | SL PB | VIDEO OUT |
|
|
|
| |
HDMI OUT | R | C | SR PR | Y |
AUDIO OUT (5.1ch) | COMPONENT VIDEO OUT |
•The arrow on the cable connector body should be face up for correct alignment with the connector on the player.
16
En