Pioneer DV-46AV operating instructions Additional information Troubleshooting, Play

Page 55

Additional information

08

Troubleshooting

Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble cannot be rectified after checking the items below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.

Problem

The disc won’t play or is automatically ejected after loading.

Remedy

•Make sure the disc is free from dirt and dust and is not damaged (page 52).

•Make sure the disc is loaded with the label side face-up and aligned properly in the disc tray guide.

•Incompatible region number: If the region number on a DVD-Video disc does not match the number on the player, the disc cannot be used (page 54). In this case the attention sentence “Incompatible disc region number Can't play disc” is displayed on screen.

•Condensation inside the player: Allow time for condensation to evaporate. Avoid using the player near an air-conditioning unit.

•Disc is loaded upside down: Reload the disc with the label side face up.

DVD-Audio playback

• The disc may have been illegally copied.

 

stops.

 

 

 

 

 

 

Picture playback stops

• Press STOP, then start playback again (

PLAY).

and the operation

• Press and hold the front panel STANDBY/ON button for about 10

buttons cannot be used.

seconds to switch the unit off, then press again to switch back on.

 

• Switch the power off once, unplug from the wall socket, then plug

 

back in and switch on again using the front panel STANDBY/ON

 

button.

 

 

 

New settings made in the

• Some settings can be changed while a disc is playing, but are not

Setup screen menus while

effective until the disc is stopped then restarted: Press STOP, then

a disc is playing are

start playback again ( PLAY).

 

ineffective.

 

 

 

 

Settings are canceled.

• When the power is cut due to power failure or by unplugging the

 

power cord, settings will be canceled: Press

STANDBY/ON on the

 

front panel to turn the player off. Wait for --OFF--to disappear from

 

the display, then unplug the power cord.

 

 

 

The remote control

• The remote control is too far from the player, or the angle with the

doesn't seem to work.

remote sensor is too wide: Use the remote within its operating range

 

(page 20).

 

 

• The batteries are exhausted: Put in new ones (page 7).

 

 

 

55

En

Page 54 Page 56
Image 55
Page 54 Page 56
Contents DV-46AV Wash hands after handling Grounding or Polarization To establish a safe level POWER-CORD CautionContents Before you start FeaturesBefore you start Chapter Energy saving design Before you startWhat’s in the box Putting the batteries in the remoteAlso compatible with Kodak Picture CD Before you start Hints on installationDisc / content format playback compatibility This unit will play DVD+R/+RW discsDVD+R/DVD+RW compatibility CD-R/RW compatibilityDVD-R/RW compatibility Compressed audio compatibilityAbout DivX About WMAJpeg file compatibility DivX video compatibilityPC-created disc compatibility Connecting up Chapter Connecting upEasy connections Connecting using the S-video output Connecting upConnecting up Connecting using the component video output Connecting the multichannel analog outputs Connecting up Connecting to an AV receiverTip Connecting the digital output Connecting using Hdmi576/480P About HdmiControls and displays Chapter Controls and displaysFront panel Dimmer Controls and displays Remote controlControls and displays Setting up the remote to control your TVUsing the remote control Using the TV remote control buttonsGetting started Chapter Switching onUsing the on-screen displays Getting startedSetting the language of this player’s on-screen displays Setting up the player for yourGetting started Press OPEN/CLOSE to open the disc tray Load a disc Getting started Playing discsPress Play to start playback Resume and Last Memory Basic playback controlsNumbers Return DVD and DivX disc menusTOP Menu EnterVideo CD PBC menus Disc may have been illegally copied Why can’t I hear Sacd audio through the digital outputs?Playing in slow motion Playing discsPlaying discs Chapter Scanning discsPause Playing discs Frame advance/frame reverseViewing a Jpeg slideshow Browsing DVD or Video CD disc with the Disc NavigatorSelect the thumbnail image for what you want to play Select a view optionUse the cursor buttons Enter to navigate Looping a section of a disc Using repeat playTo resume normal playback, select ‘Off’ from the menu Select a repeat play option Using random playSelect a random play option Clear Creating a program listUse the following controls during program play Select a search modeSearching a disc Other functions available from the program menuPress Subtitle repeatedly to select a subtitle option Playing discs Switching subtitlesSwitching audio language/ channels Zooming the screenDuring playback, press Angle to switch angle Playing discs Switching camera anglesDisplaying disc information Audio DRC Audio Settings and Video Adjust menusAudio Settings and Video Adjust menus Chapter Audio Settings menuDialog Audio Settings and Video Adjust menusVideo Adjust menu Make settings using Cursor buttons, and EnterInitial Settings menu Chapter Initial Settings menuUsing the Initial Settings menu Lpcm 2 CH Initial Settings menu Digital Audio Out settingsDTS Mpeg PCMInitial Settings menu Video Output settings Display settings Initial Settings menu Language settingsStereo Initial Settings menu Options settingsRegistering a new password Parental LockSetting/changing the Country/Area code Initial Settings menuChanging your password Setting/changing the Parental LockSelect ‘Display’ About DivX VOD contentPlaying DivX VOD content Displaying your DivX VOD registration codeAudio Output Mode Initial Settings menu Speakers settingsDTS CD About the audio output settingsInitial Settings menu About the Hdmi output settings Incompatible with Hdmi output with DVD-Audio sourcesDVD-Audio on HDMI*1 Channel compatible on HDMI*1Speaker distance for the highlighted Speaker DistanceUse PressUse the cursor up/down buttons to select a speaker Speaker InstallationDefault settings L/R Large C Large SL SR LargeSW On To change the current settingAdditional information Chapter Additional informationTaking care of your player and discs Screen sizes and disc formats Additional informationStandard TV users Resetting the playerAll the player’s settings are now reset DVD-Video regionsPlay Additional information TroubleshootingAspect does not change DVD and CD volume MalfunctionNo picture/No color Screen is stretched orCan’t hear effect OutputKHz digital audio Cannot output 96 kHz orProblemRemedy Hdmi troubleshootingAdditional information Aspect ratio Additional information GlossaryNumber Use Selecting languages using the language code listSelect ‘Other Language’ To select either a code letter or a codeCountry/Area, Country/Area code, Country/Area code letter Additional information Language code listCountry/Area code list Language Language code letter, Language codeHdmi output pin Additional information SpecificationsDimensions ±0.001 % W. Peak or lowerPioneer Corporation

DV-46AV specifications

The Pioneer DV-46AV is a versatile universal DVD player designed to deliver impressive performance across various media formats. Launched in an era where home entertainment was evolving rapidly, this player quickly became a favorite among audiophiles and movie enthusiasts alike.

One of the standout features of the DV-46AV is its compatibility with multiple disc formats. It not only plays standard DVDs but also supports DVD-Audio, Super Audio CD (SACD), Video CD, and even DivX content, showcasing its capability to cater to a diverse audience. This flexibility allows users to enjoy their favorite music and films without being limited to a single format, making it a valuable addition to any media setup.

The DV-46AV employs advanced video processing technologies that enhance picture quality. With its 108 MHz/12-bit video DAC, it provides excellent signal processing, resulting in clearer and more vibrant images. Additionally, it supports progressive scan output, which significantly improves the quality of the video displayed on compatible televisions, delivering smoother motion and improved detail.

Audio performance is another key aspect where the DV-46AV excels. It features high-quality audio DACs that ensure an immersive listening experience. Whether you are playing your favorite movie soundtrack or an audio CD, the player delivers rich, detailed sound reproduction that meets the demands of discerning listeners. The inclusion of multiple audio formats, including Dolby Digital and DTS, means that users can enjoy high-quality surround sound when paired with a compatible AV receiver.

The user interface of the DV-46AV is designed for convenience, with an easy-to-navigate menu and a remote control that features dedicated buttons for quick access to functions. This intuitive layout allows users to switch between formats and navigate their media libraries effortlessly.

Additionally, the Pioneer DV-46AV also offers a robust build quality, emphasizing its durability and longevity. Its aesthetic design fits seamlessly into any modern home theater setup, making it a stylish yet functional component.

In summary, the Pioneer DV-46AV stands out for its comprehensive format support, advanced video and audio technologies, and user-friendly features. It remains a significant choice for anyone looking to enhance their home entertainment experience, combining quality, versatility, and ease of use in one compact device.
Top Page Image Contents