![](/images/new-backgrounds/1251770/25177047x1.webp)
04Getting started
Basic playback controls
The table below shows the basic controls on the remote for playing discs. The following chapter covers other playback features in more detail.
Button What it does
PLAY Starts playback.
If the display shows RESUME or LAST MEM playback starts from the resume or last memory point (see also Resume and Last Memory below.)
PAUSE Pauses a disc that’s playing, or restarts a paused disc.
STOP Stops playback.
See also Resume and Last Memory below.
REV Press to start fast reverse scanning.
SCAN Press PLAY to resume normal (remote playback.
only)
FWD Press to start fast forward scanning.
SCAN Press PLAY to resume normal (remote playback.
only)
Skips to the start of the current track, title or chapter, then to previous tracks/titles/chapters.
Skips to the next track, title or chapter.
Button | What it does |
Numbers | Use to enter a title/chapter/track |
(remote | number. Press ENTER to select. |
only) | • If the disc is stopped, playback |
| starts from the selected title (for |
| DVD), group (for |
| (for CD/SACD/Video CD). |
| • If the disc is playing, playback |
| jumps to the start of the selected title |
| (VR mode |
| Video) or track |
| CD/Video CD). |
| *within the current group |
|
|
Resume and Last Memory
With the exception of
If the disc tray is not opened, the next time you start playback the display shows RESUME and playback resumes from the resume point. (If you want to clear the resume point, press STOP while RESUME is displayed.)
With DVDs and Video CDs, if you take the disc out of the player after stopping playback, the last play position is stored in memory. If the next disc you load is the same one, the display shows LAST MEM and playback will resume. For
24
En