09Initial Settings menu
Chapter 9
Initial Settings menu
Using the Initial Settings menu
The Initial Settings menu gives you complete control in setting up your DVD player, including audio, and video output settings, audience limitation settings, among others.
If an option is grayed out it means that it cannot be changed at the current time. This is usually because a disc is playing. Stop the disc, then change the setting.
1Press HOME MENU and select ‘Initial Settings’ from the
| HOME MENU |
| DVD |
Audio Settings | Video Adjust |
Play Mode | Disc Navigator |
Initial Settings | Setup Navigator |
2Select the setup category from the list on the left, then select an item from the menu list to the right.
3Make the setting you want.
•The language options shown in the on- screen display illustrations on the following pages may not correspond to those available in your country or region.
Digital Audio Out settings
Digital Out
You only need to make this setting if you connected this player to an AV receiver (or other component) using one of the digital outputs.
• Default setting: On
Initial Settings |
|
|
|
|
|
| |
Digital Audio Out | Digital Out | On |
|
Video Output | Dolby Digital Out | Off | |
Language | DTS Out |
|
|
Display | 96 kHz PCM Out |
|
|
Options | MPEG Out |
|
|
|
|
|
|
If at any time you need to switch off the digital audio output, set this to Off, otherwise leave it On.
Note that you can’t switch on/off the optical and coaxial outputs individually.
Dolby Digital Out
You only need to make this setting if you connected this player to an AV receiver (or other component) using one of the digital outputs.
• Default setting: Dolby Digital
Initial Settings |
|
|
|
Digital Audio Out | Digital Out |
|
|
Dolby Digital | |||
Video Output | Dolby Digital Out | Dolby Digital > PCM | |
Language | DTS Out |
|
|
Display | 96 kHz PCM Out |
|
|
Options | MPEG Out |
|
|
|
|
|
|
46
En