Pioneer DV-464, DV-360 Additional information Resetting the player, Titles, chapters and tracks

10Additional information

Resetting the player

Use this procedure to reset all the player’s settings to the factory default.

1Switch the player into standby.

2Using the front panel buttons,

hold down the (stop) button and press STANDBY/ON to switch the player back

on.

All the player’s settings are now reset, and you should see the ‘Let’s Get Started’ screen.

Titles, chapters and tracks

DVD discs are generally divided into one or more titles. Titles may be further subdivided into chapters.

Title 1 Title 2 Title 3

Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 1 Chapter 2

CDs and Video CDs are divided into tracks.

Track 1 Track 2 Track 3 Track 4 Track 5 Track 6

CD-ROMs contain folders and files. MP3 and WMA files are referred to as tracks. Folders may contain further folders.

.mp3	.mp3	.mp3	.mp3	.jpg	.jpg
Folder A			Folder B	Folder C
Track 1	Track 2	Track 3	Track 1	File 1	File 2

DVD-Video regions

All DVD-Video discs carry a region mark on the case somewhere that indicates which region(s) of the world the disc is compatible with. Your DVD player also has a region mark, which you can find on the rear panel. Discs from incompatible regions will not play in this player. Discs marked ALL will play in any player.

The diagram below shows the various DVD regions of the world.

1

2	5
		1
	6
		2
4	5	3
2		4

Selecting languages using the language code list

Some of the language options (such as ‘DVD Language’ in the Setup Navigator) allow you to set your prefered language from any of the 136 languages listed in the language code list on page 59.

1 Select ‘Other Language’.

2 Use the (cursor left/right) buttons to select either a code letter or a code number.

3 Use the (cursor up/down) buttons to select a code letter or a code number.

See Language code list on page 59 for a complete list of languages and codes.

58

En