02Connecting up
1Connect the VIDEO OUT and AUDIO OUT L/R jacks to a set of A/V inputs on your TV.
Use the supplied audio/video cable, connecting the red and white plugs to the audio outputs and the yellow plug to the video output. Make sure you match up the left and right audio outputs with their corresponding inputs for correct stereo sound.
See below if you want to use a component or
2Connect the supplied AC power cable to the AC IN inlet, then plug into a power outlet.
Note
•Before unplugging the player from the power outlet, make sure you first switch it into standby using either the front panel STANDBY/ON button, or the remote control, and wait of the
•For the above reasons, do not plug this player into a switched power supply found on some amplifiers and AV receivers.
Connecting using a SCART AV cable
A
The SCART AV connector also outputs analog audio, so there is no need to also connect the AUDIO OUT L/R jacks.
SCART |
TV |
VIDEO OUT AUDIO OUT
L
R
Y | AV CONNECTOR (RGB) TV/AV Receiver |
NT VIDEO OUT
1Use a SCART cable (not supplied) to connect the AV CONNECTOR (RGB) output to a SCART AV input on your TV (or AV receiver).
12
En