Pioneer DV-393-S manual Initial Settings menu, Video Output settings, Dts, Mpeg PCM

Initial Settings menu 07

Setting	Option	What it means
DTS Out	DTS	DTS encoded digital audio is output when playing a DTS disc.
		(Noise will be output if your amplifier/receiver is not compatible
		with DTS audio.)
	Off	No digital audio is output when playing a DTS disc.
96 kHz PCM Out	96kHz > 48kHz	96 kHz digital audio is converted to 48 kHz for digital output.
	96kHz	96 kHz digital audio is output as is at 96 kHz.
MPEG Out	MPEG > PCM	MPEG encoded digital audio is converted to PCM audio for
		digital output.
	MPEG	MPEG encoded digital audio is output as is.
HDMI Out*	LPCM (2 ch)	Set if your monitor or device only accepts stereo input. On this
* DV-490V only.		setting multichannel audio is downmixed to 2 channels for
		stereo linear PCM output.
	Auto	Dolby Digital, DTS and MPEG sources are processed
		according to how they were encoded, and linear PCM sources
		are heard as is.
	Off	No digital audio output.

Video Output settings

Setting	Option	What it means
TV Screen	4:3 (Letter Box)	Set if you have a conventional 4:3 TV. Widescreen movies are
(This setting effective for		shown with black bars top and bottom.
analog and HDMI video
	4:3 (Pan & Scan)	Set if you have a conventional 4:3 TV. Widescreen movies are
output. See also Screen
sizes and disc formats on		shown with the sides cropped so that the image fills the screen.
page 41.)
	16:9 (Wide)	Set if you have a widescreen TV.
Component Out	Interlace	Set if your TV is not compatible with progressive scan video.
	Progressive	Set if your TV is compatible with progressive scan video (see
		your TV’s instruction manual for details). See also Switching
		the video output to interlace using the front panel controls on
		page 13.
		Note that progressive scan video is only output from the
		component video jacks and that there is no output from the
		composite jacks when this setting is selected.

35

En