Pioneer DV-393-S manual Hdmi troubleshooting DV-490V

Additional information

Selecting languages using the language code list

Some of the language options (such as ‘DVD Language’ in the Setup Navigator) allow you to set your preferred language from any of the 136 languages listed in the language code list on page 46.

08

1	Select ‘Other Language’.
2	Use the	(cursor left/right) buttons
to select either a code letter or a code
number.
3	Use the	(cursor up/down) buttons

to select a code letter or a code number.

See Language code list on page 46 for a complete list of languages and codes.

HDMI troubleshooting (DV-490V)

Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble cannot be rectified after checking the items below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.

Problem	Remedy
No HDMI audio output.	• This unit has been designed to be compliant with HDMI (High
	Definition Multimedia Interface). Depending on the component you
	have connected, unreliable signal transfers may result.
	• If the front panel HDMI indicator is lit:
	– You won’t hear any sound from the HDMI output if the source
	component is only DVI/HDCP-compatible.
	• If the front panel HDMI indicator is unlit then:
	– Make sure that you’ve selected this player as the HDMI input in the
	settings for the component you’re using. You may need to refer to the
	instruction manual of the component to do this.
	– Check that the HDMI cable is connected properly and that the cable
	isn’t damaged.
	– Check that components connected using the HDMI interface are
	switched on and HDMI compatible.

43

En