Pioneer BDR-203 Mode Pages, Mode Page Codes, Caching Parameter, 12.2.2, Time-out & Protect

Page 33

BDR-203/BDC-203 Command Reference Manual Version 0.90

4.12.2 Mode Pages

The drive is not supported the Parameters Savable (PS) bit and must be set to zero.

The Page Code field identifies the format and parameters defined for that mode page.

The drive supports following Mode pages.

Table 31 - Mode Page Codes

Page code	Description	Section
01h	Error Recovery Page	4.12.2.2 on page 31
05h	Write Parameters Page	4.12.2.5 on page 32
08h	Caching Page	4.12.2.1 on page 31
0Eh	CD Audio Control Page	See SFFC INF-8090i document
1Ah	Power Condition Page	4.12.2.3 on page 31
1Dh	Time-out & Protect Page	4.12.2.4 on page 31
2Ah	Capabilities & Mechanical Status Page	4.12.2.6 on page 33
3Fh	Return all pages (valid only for the MODE SENSE command)

4.12.2.1 Caching Page

The Caching Page is supported for compatibility of other CD-R/RW drive. This page has no effect on write/re d oper tion. The returned Caching parameters by the MODE SENSE (10) Command are modified to the new parame ers af er rece ving new parameters by MODE SENSE (10) Command.

Table 32 - Caching Parameter

Byte

Bit

7

6

5

4

3

2

1

0

0

PS

Reserved

Page Co

= 08h

1

Page Length = 0Ah

2

IC

ABPF

CAP

DISC

SIZE

WCE

MF

RCD

3

Demand Read Priority

Write Retention Priority

4

(MSB)

Disable Pre-fetch Transfer Length

5

(LSB)

6

(MSB)

Minimum Pre-fetch

7

(LSB)

ONFIDENTIAL

8

(MSB)

C

Maximum Pre-fetch

9

(LSB)

10

(MSB)

Maximum Pre-fetch Ceiling

11

(LSB)

Default value of the WCE bit is one. D fault value of any other bits and field is zero.

4.12.2.2

Err r Recovery Parameters Page

The AWRE a d ARRE bits are not supported and are ignored.

The TB, RC, DTE and DCR bits are ignored.

IONEER

P

The PER bit and EMCDR field are used to control the defect reporting.

Setting value of the Read Retry Count and the Write Retry Count field are ignored.

4.12.2.3 Power Condition Page

The default value of an Idle bit is one. The default value of the Idle Timer field is 000000c8h (20 second).

The default value of the Standby bit is one. The default value of Standby Timer field is 000012C0h (8 minutes).

4.12.2.4 Time-out & Protect Page

The DISP, SWPP bits are not supported and must be set to 0.

Page 32

Image 33

Contents Onfidential BDR-203/BDC-203 Command Reference Manual Version Confidential Pioneer Change History PioneerDrive Information Sata versionPioneer BD-ROMCompatible Media Power ConditionPacket Commands MMC-5Send CUE Sheet BDR-203/BDC-203 Command Reference Manual Version Close TRACK/SESSION Command Blank CommandBlank Type Valid Close Function and MediaFormat Type Format Unit CommandFormat Code = 111b CD-RW only P4.3.1 F rmat Code = 001bFormat Sub-type On BD-R mediaFormat Type = 30h Format with Spare Areas for BD-RE Format Type = 32h Fo mat BD-R with Spare AreasFeature List GET Configuration Command Feature List and Profile ListProfile List DVD-R Media statesCurrent Profile and Current bit for DVD Media Current Profile and Current bit for No Media and CD MediaIoneer Current Profile and Current bit for +R/+RW/+R DL Media 3.4 Current Profile and Current bit for BD-RE/R/ROM Med aEnt bit for BD-RE/R/ROM Media Onfidential Feature List for CD MediaFeature List for DVD-ROM/-R/-RW/RAM Media Current bit of the Feature List for DVD MediaFeature List for +R/+RW/+R DL Media Current bit of the Feature List for +R/+RW/+R DL MediaFeature List for BD-RE/R/ROM Media Current bit of the Feature List for BD-RE/R/ROM MediaGET Performance Command GET EVENT/STATUS Notification CommandNotification Class Request Media EventsPerformance Data Performance Type field = 00hDVD- R DL Atip Write Speed Type field = 03hUltra Speed DVD 4 CLV DVD 5 CLVCLV OnfidentialBDR-203/BDC-203 Command Reference Manual Version LOG Select Command Inquiry Command LOG Sense Command Inquiry Data FormatMode Select 10 Command Mechanism Status CommandMode Sense 10 Command Mode Parameter Header MSBMedium Type Codes Mode Page Codes Mode PagesCaching Caching ParameterWrite Parameters Mode Write Type FieldData Block Type Field DVD Capabilities and Mechanical Status Page Format 12.2.6 C/DVD Capabilities and Mechanical StatusBit Reserved Reserved = 00h Read Buffer Capacity Command Read Capacity CommandRead Disc Information Command SET CD Speed Command Request Sense CommandLoading Status Parameters to set Writing speed for CD-R/RWAvailable Writing speed for each media Writing SpeedParam t rs to s t Writing speed for CD-R/RW media Parameters to set Writing speed for DVD-R/RW/R DL mediaParameters to set Writing speed for +R/+RW/+R DL media Write Buffer CommandParameters to set Writing speed for BD-R/RE media +R DL +RW