Pioneer BDR-203, BDC-203 manual Read Buffer Capacity Command, Read Capacity Command

Page 37

BDR-203/BDC-203 Command Reference Manual Version 0.90

4.16 READ BUFFER CAPACITY Command

The Block bit is supported.

The Length of Buffer field in the READ BUFFER CAPACITY data is set to following.

BD or no medium : 180000h

DVD : 118000h

CD : 126800h

4.17 READ CAPACITY Command

The RelAdr bit is not supported and must set to 0.

If empty disc is mounted, the Logical Block Address field in the Read Capacity Data is set to zero.

If a non-blank +RW disc is mounted, the Logical Block Address field in the Read Capacity Data is set to 23053Fh.

If a disc that is not a +RW and has no Complete Session is mounted, Logical Block Address field in the Read Capacity Data is set to zero.

When a CD-R/RW disc is mounted, if it is recorded by Track-at-once, the Logical Block Address field in the Read Capacity Data is set to the LBA immediately behind of the outermost Lead-out, so 2 Run-out blocks will be encountered.

4.18 READ DISC INFORMATION Command

For +R/+R DL media, the Last Session Lead-in Start Address is the LBA of where the next I tro shall be recoded. If no session exists on the disc, then the value returned is 00000000h. If the disc has complete status, then the value re ur ed s FFFFFFFFh.

For +R media, the Last Possible Lead-out Start Address is the LBA found in the ADIP of the disc’s lead-in. If the disc has complete status, then the value returned is FFFFFFFFh.

For +R DL media, the Last Possible Lead-out Start Address is set as follows.

1) In case of a disc that has no complete status, it is set to the following value.

The value = ( L0 Data Zone Capacity + 1 – 30000h ) x 2 – Exte ded Part al Lead-out Size

As for the L0 Data Zone Capacity,

if it has not been changed from the default value, it is set to the Last Possible Physical Sector of the Data Zone on Layer 0 in ADIP,

and if it has been changed from the default value, it is set to the Actual last PSN of Data Zone on Layer 0 in TOC.

As for the Extended Partial Lead-out Size,

ONFIDENTIAL

 

C

if the disc has an Ext nd d Pa tial Lead-out, it is 30000h,

and if the disc has no Ext nd d Pa tial Lead-out, it is 0.

IONEER

 

2) In case of a disc that has a complete status, it is set to FFFFFFFFh. The OPC table is ot support d for +R/+RW/+R DL media.

P

Page 36

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Onfidential BDR-203/BDC-203 Command Reference Manual Version Confidential Pioneer Change History PioneerDrive Information Sata versionPioneer BD-ROMCompatible Media Power ConditionMMC-5 Packet CommandsSend CUE Sheet BDR-203/BDC-203 Command Reference Manual Version Close TRACK/SESSION Command Blank CommandBlank Type Valid Close Function and MediaFormat Type Format Unit CommandFormat Code = 111b CD-RW only P4.3.1 F rmat Code = 001bFormat Sub-type On BD-R mediaFormat Type = 30h Format with Spare Areas for BD-RE Format Type = 32h Fo mat BD-R with Spare AreasFeature List GET Configuration Command Feature List and Profile ListProfile List DVD-R Media statesCurrent Profile and Current bit for DVD Media Current Profile and Current bit for No Media and CD MediaIoneer 3.4 Current Profile and Current bit for BD-RE/R/ROM Med a Current Profile and Current bit for +R/+RW/+R DL MediaEnt bit for BD-RE/R/ROM Media Onfidential Feature List for CD MediaFeature List for DVD-ROM/-R/-RW/RAM Media Current bit of the Feature List for DVD MediaFeature List for +R/+RW/+R DL Media Current bit of the Feature List for +R/+RW/+R DL MediaFeature List for BD-RE/R/ROM Media Current bit of the Feature List for BD-RE/R/ROM MediaGET Performance Command GET EVENT/STATUS Notification CommandNotification Class Request Media EventsPerformance Data Performance Type field = 00hDVD- R DL Atip Write Speed Type field = 03hUltra Speed DVD 4 CLV DVD 5 CLVCLV OnfidentialBDR-203/BDC-203 Command Reference Manual Version LOG Select Command Inquiry CommandLOG Sense Command Inquiry Data FormatMode Select 10 Command Mechanism Status CommandMode Sense 10 Command Mode Parameter Header MSBMedium Type Codes Mode Page Codes Mode PagesCaching Caching ParameterWrite Type Field Write Parameters ModeData Block Type Field DVD Capabilities and Mechanical Status Page Format 12.2.6 C/DVD Capabilities and Mechanical StatusBit Reserved Reserved = 00h Read Capacity Command Read Buffer Capacity CommandRead Disc Information Command SET CD Speed Command Request Sense CommandLoading Status Parameters to set Writing speed for CD-R/RWAvailable Writing speed for each media Writing SpeedParam t rs to s t Writing speed for CD-R/RW media Parameters to set Writing speed for DVD-R/RW/R DL mediaParameters to set Writing speed for +R/+RW/+R DL media Write Buffer CommandParameters to set Writing speed for BD-R/RE media +R DL +RW
Top Page Image Contents