Pioneer BDC-203, BDR-203 manual Write Parameters Mode, Write Type Field, Data Block Type Field

Page 34

BDR-203/BDC-203 Command Reference Manual Version 0.90

4.12.2.5 Write Parameters Mode Page

The parameters specified in the Write Parameters Mode Page are not applicable to DVD-RAM media. The parameters specified in the Write Parameters Mode Page are not applicable to +R/+RW/+R DL media. The parameters specified in the Write Parameters Mode Page are not applicable to formatted DVD-RW media. The parameters specified in the Write Parameters Mode Page are not applicable to BD-RE/R media.

The default value of the BUFE bit is 1. The drive ignores this bit and assumes this bit is set to 1.

If LS_V bit is set to one, the Link Size field must be set to 7h for CD-R/RW or 10h for DVD-R/-RW. If LS_V bit is set to zero, the drive assumes the Link Size of 7h for CD-R/RW or 10h for DVD-R/-RW. The default value of the LS_V bit is 1, and the default value of the Link Size field is 10h.

The drive supports following Write Type.

Table 33 - Write Type Field

Value

 

 

Definition

for CD-R/RW

for DVD-R/-RW

for DVD-R DL

 

 

 

Support

Test Write

Support

Test Write

Support

Test Write

 

 

 

 

 

 

00h

 

Packet/Incremental

yes

yes

yes

yes

yes

yes

 

01h

 

Track-at-once

yes

yes

-

-

-

-

 

02h

 

Session-at-once/Disc-at-once

yes

yes

yes

yes

yes

yes

 

1

 

2368

Raw data with P and Q

sub-channel

ONFIDENTIALyes

-

 

03h

 

Raw

 

yes

-

-

-

-

 

04h

 

Layer Jump Recording

-

-

-

-

yes

yes

 

If the Layer Jump Recording has not been supported, Layer Jump Recording (04h) is not supported. The default value of the Test Write bit is 0, and the default value of the Write Type fi ld is 0h.

When FP bit is set to one for CD-R/RW media, the Packet Size field must be set to 32. B cause the drive supports 64K Fixed Packet Writing only. The default value of the FP bit is 0.

The Copy bit is not supported, and setting of this bit is ignored.

The drive supports following Data Block Type for CD-R/RW media.

 

Table 34 – Data Block Type Field

 

 

 

Value

Block Size

 

 

C

Support for CD-R/RW

 

 

 

Definiti n

 

0

2352

Raw data

 

yes

 

 

 

 

 

 

2

IONEER

yes

 

2448

Raw data with P-W sub-channel appended

 

3

2448

Raw data with aw P-W sub-channel appended

yes

 

8

2048

Mode 1 (ISO/IEC 10149)

yes

 

9

2336

Mode 2 (ISO/IEC 10149)

yes

 

10

2048

Mode 2

(CD-ROM XA, form 1)

yes

 

11

2056

Mode 2

(CD-ROM XA, form 1)

yes

 

12

2324

Mode 2

(CD-ROM XA, form 2)

yes

P

2332

Mode 2

(CD-ROM XA, form 1, form 2, or mixed form)

yes

 

13

The drive supports writing of DVD and CD. Each media needs different value of Link Size field in Write Parameters page. Current value of parameter can not change by mounted media automatically. But Default value of Link Size field is changed by mounted media. If DVD media is mounted, Link Size field of default value in Write Parameter page is set to 10h. If CD media is mounted, it is set to 07h. It recommends following step to setting the Write Parameters page.

1.Get default value of Write Parameters by using MODE SELECT command. ( Page Control (PC) field = 10b)

2.Modify the necessary field on above parameter.

3.Send the modified parameter by using MODE SELECT command.

Page 33

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Onfidential BDR-203/BDC-203 Command Reference Manual Version Confidential Pioneer Pioneer Change HistoryPioneer Sata versionDrive Information BD-ROMPower Condition Compatible MediaMMC-5 Packet CommandsSend CUE Sheet BDR-203/BDC-203 Command Reference Manual Version Blank Type Blank CommandClose TRACK/SESSION Command Valid Close Function and MediaFormat Code = 111b CD-RW only Format Unit CommandFormat Type P4.3.1 F rmat Code = 001bFormat Type = 30h Format with Spare Areas for BD-RE On BD-R mediaFormat Sub-type Format Type = 32h Fo mat BD-R with Spare AreasGET Configuration Command Feature List and Profile List Feature ListProfile List Media states DVD-RCurrent Profile and Current bit for No Media and CD Media Current Profile and Current bit for DVD MediaIoneer 3.4 Current Profile and Current bit for BD-RE/R/ROM Med a Current Profile and Current bit for +R/+RW/+R DL MediaEnt bit for BD-RE/R/ROM Media Feature List for CD Media OnfidentialCurrent bit of the Feature List for DVD Media Feature List for DVD-ROM/-R/-RW/RAM MediaCurrent bit of the Feature List for +R/+RW/+R DL Media Feature List for +R/+RW/+R DL MediaCurrent bit of the Feature List for BD-RE/R/ROM Media Feature List for BD-RE/R/ROM MediaNotification Class Request GET EVENT/STATUS Notification CommandGET Performance Command Media EventsPerformance Type field = 00h Performance DataDVD- R DL Write Speed Type field = 03h AtipUltra Speed DVD 5 CLV DVD 4 CLVOnfidential CLVBDR-203/BDC-203 Command Reference Manual Version LOG Sense Command Inquiry CommandLOG Select Command Inquiry Data FormatMode Sense 10 Command Mode Parameter Header Mechanism Status CommandMode Select 10 Command MSBMedium Type Codes Caching Mode PagesMode Page Codes Caching ParameterWrite Type Field Write Parameters ModeData Block Type Field 12.2.6 C/DVD Capabilities and Mechanical Status DVD Capabilities and Mechanical Status Page FormatBit Reserved Reserved = 00h Read Capacity Command Read Buffer Capacity CommandRead Disc Information Command Loading Status Request Sense CommandSET CD Speed Command Parameters to set Writing speed for CD-R/RWParam t rs to s t Writing speed for CD-R/RW media Writing SpeedAvailable Writing speed for each media Parameters to set Writing speed for DVD-R/RW/R DL mediaParameters to set Writing speed for BD-R/RE media Write Buffer CommandParameters to set Writing speed for +R/+RW/+R DL media +R DL +RW
Top Page Image Contents