Toshiba SD-KV550SU owner manual Duplicating a video tape, Connection with second VCR

Other functions (VCR)

Duplicating a video tape

If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power.

VCR DVD INPUT SELECT

STOP

SP/SLP

REC/OTR

Duplicating a video tape

Preparation:

•Turn ON the TV and select the corresponding video input.

•Press VCR DVD selector to select the VCR mode. (The VCR mode indicator will light.)

•Load a cassette tape with the erase prevention tab intact.

•Load a previously recorded tape into the playback VCR or Camcorder.

1 Press SP/SLP to select the desired tape speed SP or SLP.

It is recommended to set the

tape speed to the SP mode on the recording VCR for best results.

2 Press INPUT SELECT once or twice to select AUDIO/VIDEO input position.

“L1” or “L2” will appear in the display.

L1: on the rear panel

L2: on the front panel

Connection with second VCR

Playback VCR

To VIDEO OUT To AUDIO (R) OUT To AUDIO (L) OUT

AUDIO/VIDEO cable (supplied)

Recording VCR

To VIDEO IN	To AUDIO (R) IN
	To AUDIO (L) IN

Connection with Camcorder

3 Press PLAY on the playback VCR or Camcorder.			Playback Camcorder
			To AV Jack
4	Press REC/OTR on the recording VCR.		Recording VCR
	The duplicating process begins.
			To AUDIO (R) IN
			To AUDIO (L) IN
5		To VIDEO IN	AUDIO/VIDEO cable (not supplied)
	Press STOP when you finish duplicating.	For duplicating a previously recorded tape from a
		camcorder, follow the camcorder manufacturer’s

instructions. A typical camcorder dubbing hookup is shown above.

40

2I30201B-En_p38-41 40 1/13/06, 2:49 PM