Toshiba SD-KV550SU Zooming/Locating desired scene, VCD Zooming, VCD Locating desired scene, Clear

Advanced playback (DVD)

Zooming/Locating desired scene

ZOOM

C/D/B/A

ENTER

CLEAR

DISPLAY 0–9

JUMP

DVD

VCD Zooming

CD

This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.

1 Press ZOOM during playback.

The center part of the image will be zoomed in.

Each press of ZOOM will change the ZOOM 1 (x 1.3), 2 (x 1.5) and 3 (x 2.0).

1

2 Press C/D/B/A to view a different part of the frame.

You may move the frame from the center position to UP, DOWN, LEFT or RIGHT direction.

In the zoom mode, press ZOOM repeatedly to

3 return to a 1:1 view ( Off).

Notes:

•You can select the Pause, Slow or Search playback in the zoom mode.

•Some discs may not respond to zoom feature.

DVD

VCD Locating desired scene

CD

Use the title, chapter and time recorded on the DVD disc to locate the desired point to play back. In the case of VCD/CD discs, time and track are used to locate the desired point to play back. To check the title, chapter and time, press DISPLAY.

1 Press JUMP during playback or stop mode.	Press Number buttons (0–9) to change the
	3 number.	Jump
Jump
Title	Title
Chapter	Chapter	12
Time	Time

Advanced playback (DVD)

	• “Time” only works in playback		• If you input a wrong number, press
	or resume stop mode.
2			CLEAR.
	Press C or D to select the “Title”, “Chapter” or		• Refer to the package supplied with
	“Time”.	4	the disc to check the numbers.
	Jump		Press ENTER. Playback starts.
	Title
	Chapter		• When you change the title,
	Time		playback starts from Chapter 1
			of the selected title.

• Some discs may not work in the

Notes:	above operation.
• In case of the Audio CD and Video-CD, only Track and Time
can be selected.
• In case of the Video-CD playback with PBC, the JUMP does
not work. Turn off the PBC 51 .

45

2I30201B-En_p42-45 45 1/13/06, 2:49 PM