Controlling Your TV with the Supplied Remote
The remote control can be compatible with various brands of TV/Cable box/DSS satellite receiver by setting their control codes. The TOSHIBA code has initially been set to control TOSHIBA TVs.
Setting TV Control Codes
1.Press TV to set the remote control operating your TV.
2.While holding down PROGRAM button, enter the two digits of your TV’s brand code (listed on page 39) using number buttons.
3.Release PROGRAM.
By pressing | You can |
POWER | Turn the TV on or off. |
|
|
CH/TRK +/– | To select TV channels in the upper |
| or lower direction. |
|
|
VOL +/– | Adjust the volume of the TV. |
|
|
Number buttons | To select TV channels. |
| When selecting channels 1 to 9, |
| first enter 0 and then the desired |
| number. |
|
|
100 | To substitute for 100 channel key. |
|
|
DISPLAY | To turn on or off TV’s screen |
| display. |
|
|
INPUT SELECT | Switch the TV’s input source |
| between the TV and other input |
| sources. |
|
|
ENTER | To use for the TV’s ENTER key. |
|
|
Important
Some TV’s may not respond to all the operations above, or may not be operated at all with this remote control. In this case, operate your TV with its own remote control.
Notes:
For some brands, several control codes (brand codes) are allocated. Try each of them until the but- tons work on your TV.
If you replace the remote control’s batteries, set the brand code again.
DISPLAY |
INPUT SELECT |
TV |
POWER |
PROGRAM
Number buttons
100
CH/TRK, VOL
ENTER
38