Specifications
General
Power requirements | AC 120V , 60 Hz |
Power consumption | 23W |
Dimensions (approx.) | 430 X 78.5 X 275 mm (16.9 X 3.1 X 10.8 inches) (w x h x d) |
Mass (approx.) | 8.8 lbs (4.0 kg) |
Operating temperature | 5˚C to 40˚C (41˚F to 104˚F) |
Operating humidity | 5 % to 90 % |
Signal system | NTSC |
Inputs
ANTENNA IN | 75 ohms (VHF/UHF/CATV) |
VHS VIDEO IN (LINE1, 2) | 1 |
VHS AUDIO IN (LINE1, 2) | |
Outputs |
|
VIDEO OUT | 1 |
(Y) 1.0 V | |
| (C) 0.286 V |
COMPONENT VIDEO OUT | (Y) 1.0 V |
(Progressive Scan) | (Pb)/(Pr) 0.7 V |
Audio output (digital audio) | 0.5 V |
Audio output (optical audio) | 5 V |
Audio output (analog audio) | 2.0 Vrms (1 KHz, 0 dB), 330 ohms, RCA jack (L, R) x 1 |
RF OUT | Channel 3 or 4 (Switchable) |
VCR Specifications |
|
Head system | Four head helical scan azimuth system |
Timer | |
Tape speed | SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec |
Tape width | 12.7 mm |
Maximum recording time | SP: 2 HOURS |
Rewind time | About 3 minutes |
Antenna | 75 ohms (VHF/UHF) |
VHF output signal | Channel 3 or 4 (Switchable) |
Channel coverage | VHF: |
Frequency range | 20Hz to 20kHz |
More than 43dB | |
Dynamic range | More than 88 dB |
Channel separation | More than 60 dB |
DVD Specifications |
|
Laser system | Semiconductor laser, wavelength 650 nm |
Frequency response | DVD (PCM 96 kHz): 8 Hz to 44 kHz, DVD (PCM 48 kHz): 8 Hz to 22 kHz |
| CD: 8 Hz to 20 kHz |
More than 100dB (ANALOG OUT jacks only) | |
Harmonic distortion | Less than 0.008% |
Dynamic range | More than 95 dB (DVD/CD) |
Accessories: |
|
HDMI cable x 1, Video cable x 1, Audio cable x 1, RF
Design and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories. Dolby and the
DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc.
46