
Hookup and Installation
Step 3
Connect Audio Components to the Audio Filter
The Belkin PureAV Power Console PF31 contains an isolated Audio Filter that is optimized to clean and condition the power to all of your audio components. The Audio Filter also isolates your audio components from connected video and
A. Attach Belkin PureAV power cord labels to each component’s power cord before you plug the cord into the corresponding outlet on the Power Console.
B.CD – Connect your CD player power cord to the outlet labeled “CD”.
C.Tape – Connect your tape player power cord to the outlet labeled “Tape”.
D.Auxiliary – This outlet can be used to connect any other audio equipment you may have.
E.Receiver (Preamp) – Connect your receiver or preamp power cord to the outlet labeled “Receiver”.
Note: You can connect any type of audio component into the Audio Filter outlets. You are not limited to the components listed above.
Belkin PureAV Power Console
8