Connecting to a Stereo Component
By connecting the digital output (SPDIF) on the DVD player through a coaxial cable (optional accessory) to a Dolby Digital/DTS amplifier or processor, you can enjoy full 5.1 channel surround sound. Follow these steps for making the connection.
1. Turn off both DVD player and your stereo system.
2. Connect the SPDIF to your stereo system as illustrated below.
3. Slide INPUT/OUTPUT to OUTPUT.
4. Turn on power of DVD player.
Coaxial terminal connecting stereo system
COAXIAL
Coaxial cable |
| Coaxial cable |
|
|
|
SPDIF(black)COAXIAL(black)
Depending on your amplifier system, you need to make the following selection from MENU:
1.Refer to Changing Audio Output on page 26.
2.Select SPDIF/RAW if your amplifier has
3.Select SPDIF/PCM if your amplifier has 2 channels.
4.Select OFF, if there is no digital signal output from the DVD player.