Using the Battery Pack
Installing the battery pack | Removing the battery pack |
1. Align and insert the battery |
| 2. Slide the battery pack to the |
| 1. Slide down the latch. |
| 2. Slide the battery pack to the |
pack into the corresponding |
| left until it clicks into place. |
|
|
| right, and remove. |
|
|
|
| |||
slots on the back of the unit. |
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
|
|
Charging the battery pack
1.Attach the battery pack to the Player.
2.Use the AC adaptor to charge the battery pack. Make the connection as illustrated below.
3.Slide POWER to ON. (The Player must be turned on to charge the battery).
LED Indicator
AC adaptor | Power cord |
|
|
To home power outlet
To DC12V IN on the DVD player
During charging, the red and green LEDs blink alternatively.
When the battery is fully charged, the orange LED stays lit. 
When the Player uses battery for power, the red LED lights. If the battery power is low, the red LED blinks.