Avayon DXP-10P manual Setting Audio Output, Changing Audio output

Setting Audio Output

1.Press SETUP on the remote control.

2.Use the direction keys(▲▼◄►) to select AUDIO SETUP and its sub-menu.

3.Press ENTER to confirm your selection.

4.Press SETUP to exit, or select EXIT SETUP to exit.

Changing AUDIO output

Note:

SPDIF/OFF:select this when you do not want to have digital audio signal output.

SPDIF/RAW:select this when the digital audio output is

connected to an external amplifier with Dolby Digital or DTS decoder which gives 5.1 channel sound.

SPDIF/PCM:select this when the external amplifier has no decoder.