Bose 525p manual Other switches, For a Bose link remote in another room

EnglishDansk DeutschEspañol FrançaisItliano Nederlands Svenska

REFERENCE

Using the media center:

1.Lift the media center door and press the All Off button.

2.Press and hold the Enter button. Your current house code will appear in the media center display window in the form of four rectangles, which represent the positions of switches

1 through 4:

HOUSE CODE:

Switches 1 - 4 down = 0 0 0 0 (current house code)

3.While holding the Enter button, press any button on the remote control.

The media center displays the new house code, which confirms its recognition of the

new code:

NEW HOUSE CODE:

(Switch 1 up, 2 down, 3 up, and 4 down = 1 0 1 0 (new house code)

4.Release the Enter button. The system remains off.

5.If you have additional remote controls, change the switches to match those of the first remote control by following steps 1-3 above. You do not need to repeat steps 4-5.

Note: To verify your system’s house code, press Enter while the system is off. The display confirms the settings of switches 1-4.

REFERENCE

Figure 20

Miniature switches on the Primary remote are set for use in the Main room (A)

Switches (1-4)

as set at the factory: all switches down.

1 2 3 4 5 6 7 8 9

Other switches

Switch 5 determines which “audio stream” (of two) you hear.

For more information on streams, refer to “Setting up a second room with sound” on page 42.

Switches 6-9 represent the room where the remote will be used.

In the main room, the primary remote is set as Room A with all switches down.

For a Bose® link remote in another room

Switches 1-4 need to match those switch settings in your main remote.

1 2 3 4 5 6 7 8 9

Set switches 5-9 for the room where you will use the Bose® link remote.

41