
| Svenska | Nederlands | FrançaisItliano | DeutschEspañol | 
REFERENCE
English
| System issues | 
 | What to do | 
| 
 | 
 | 
 | 
| No sound from TV only | • | If your TV has Variable instead of Fixed audio output, you need to turn off the TV speakers internally. | 
| 
 | 
 | Refer to your TV owner’s guide and follow the instructions provided there. | 
| 
 | 
 | 
 | 
| Speech and lip movement on | • | Adjust the Audio Delay using the Settings menu on screen. For details, refer to “Choosing new settings” | 
| screen are not in sync | 
 | on page 54. | 
| 
 | 
 | 
 | 
| Radio does not work or has | • | Make sure the antennas are connected and positioned as shown in “Installing the FM and AM radio | 
| poor reception | 
 | antennas” on page 25. | 
| 
 | • | Adjust the FM antenna position to reduce interference. | 
| 
 | • | Move antennas farther from the media center, TV, or other electronic equipment. | 
| 
 | • | Select another station. You may be in an area of weak signal coverage for some stations. | 
| 
 | 
 | 
 | 
| Volume level changes when | • | Change the Audio Level for the source input so its volume matches the volume of the radio and DVD in | 
| another sound source is | 
 | the Bose® system. Refer to “Audio options” on page 49. | 
| selected | 
 | 
 | 
| Remote issues | 
 | What to do | 
| 
 | 
 | 
 | 
| 3•2•1® remote does not | • | Make sure that the remote is set to control the component. Refer to “Setting the remote for your TV” on | 
| control your TV, CBL•SAT, or | 
 | page 31. | 
| AUX component | • | Make sure that the front of the component is not obstructed. | 
| 
 | • | Reset the remote using a different device code for the component you want to control. Refer to | 
| 
 | 
 | “Device codes” located at back of the book. There may be several codes that can turn the component | 
| 
 | 
 | on and off, but only one that provides further control (channel changing, for example). | 
| 
 | 
 | 
 | 
| 3•2•1 remote behaves | • | Aim the remote at the front of the media center. | 
| erratically or does not work | • | Make sure the battery polarity (+ and  | 
| 
 | • | Install new batteries. Refer to “Replacing remote batteries” on page 60. | 
62