Bel Canto Design PL-1A Playing Discs Switching DVD-RW audio channel, Switching camera angles

Page 35

Playing Discs

Switching DVD-RW audio channel

When playing a DVD-RW disc recorded with dual-mono audio, you can switch between the main, sub, and mixed channels during playback.

1Press AUDIO repeatedly to select an audio channel option.

Audio

1L

Dolby Digital 1+1CH

 

 

 

Switching DVD-Audio audio channel

Depending on the disc, you may be able to switch channels when playing DVD-Audio discs—see the disc box for details.

1Press AUDIO repeatly to select an audio channel option.

 

 

Digital Out Converted

Audio

1

Linear PCM 192kHz24bit

 

 

2CH

When you change the audio channel, playback restarts from the beginning of the current track.

Some discs only allow you to change audio channel from the disc menu. Press TOP MENU to access.

To set audio language preferences, see Audio Language.

Switching CD/MP3/Video CD audio channel

You can switch between stereo, just the left channel or just the right channel of a CD/ MP3/Video CD/Super VCD. (To change the audio channel of a CD it must be playing.)

Some Super VCDs have two soundtracks. With these discs you can switch between the two soundtracks as well as individual channels in each.

1Press AUDIO repeatly to select an audio channel option.

Audio Stereo

Switching camera angles

Some DVD-Video discs feature scenes shot from two or more angles—check the disc box for details.

When a multi-angle scene is playing, a icon appears on screen to let you know that other angles are available (this can be switched off if you prefer).

During playback press ANGLE to switch angle.

05

347

45

En

Image 35
Contents Rev.3 3/22/04 Table of Contents Congratulations Important Safety Instructions Important Notice For U.S. modelAdditional Saftey Requirements DVD-Audio and Sacd compatible Before You Start FeaturesPhoto CD / DVD-RAM / DVD-ROM General Disc CompatibilityCDs, SACDs and Video CD are divided into tracks Before You StartPage Page Controls and Displays Number buttons Controls and Displays Remote controlEnter & Joystick ReturnSetting up the Remote Control to Preset code listJoystick Getting Started Using the on-screen displaysSetting up with the Setup Navigator Select ‘Setup Navigator’Did you connect this player to an AV receiver? Getting StartedSelect a DVD language Congratulations, setup is complete Press 3 play to start playback Getting Started Playing discsBasic playback controls Press 0 OPEN/CLOSE to open the disc tray Load a disc¢ Skips to the next track or chapter Front panel controlsDVD disc menus Stops playbackNumbers Video CD PBC menusWhy won’t the disc I loaded play? Disc may have been illegally copied Some MP3 tracks don’t show up. Where are they?Playing Discs Introduction Using the Disc Navigator to browse the contents of a discMP3 For CDs and Video CDs select a trackTo resume normal playback, press Play Using the Multi DialPlaying Discs Scanning discs Slow motion speed is displayed on- screen Playing Discs Playing in slow motionFrame advance/frame reverse Press repeatedly to change the slow motion speedPress Enter on ‘AStart Point’ to set the loop start point Playing Discs Looping a section of a discPress Enter on ‘BEnd Point’ to set the loop end point Playing Discs Using repeat play Random Group Random Track Random Off Playing Discs Using random playSelect a random play option Random Title Random Chapter Random OffSelect ‘Create/Edit’ from the list of program options Playing Discs Creating a program listTo play the program list, press Program list can contain up to 24 titlesChapters/groups/folders/tracks Select a program play function Editing a program listOther functions available from the program menu Press Enter to start playback Playing Discs Searching a discPress Audio repeatedly to select an audio language option Playing Discs Switching subtitlesSwitching DVD-Video audio language Press Subtitle repeatedly to select a subtitle optionSwitching camera angles Playing Discs Switching DVD-RW audio channelSwitching DVD-Audio audio channel Switching CD/MP3/Video CD audio channelDuring PBC playback only Playing Discs Displaying disc informationAudio Settings Menu Audio DRC TruSurround’ or ‘Off’, as required Audio Settings Menu Virtual SurroundSet the distance for each speaker Audio Settings MenuAdjust the picture quality settings Video Settings Menu Video Adjust Interlace OnlyCreating your own interlace output presets Use the joystick left/right to select a presetAjust the picture quality settings Video Settings MenuCreating your own progressive output presets Dolby Digital Out Initial Settings Menu Using the Initial Settings menuDigital Audio Out settings Digital Out427 Video Out Initial Settings MenuVideo Output settings TV ScreenStill Picture Language settingsDefault setting Auto Default setting EnglishSubtitle Language Auto Language Default setting English Default setting OnOSD Language Display settingsDVD Menu Language Subtitle DisplayScreen Saver Angle IndicatorOptions BackgroundEnter a new password Select ‘Password’Use the number buttons to enter a 4- digit password Select ‘Password Change’Select ‘Country Code’ Use number buttons to enter your password, then press EnterSelect ‘Level Change’ Select a new levelAuto Disc Menu Bonus GroupSacd Playback Group Playback DVD Playback ModeDefault setting Single Default setting DVD-Audio Default setting 2ch AreaSpeakers Initial Settings Menu CD PlaybackAudio Output Mode Speaker InstallationL and R speakers are paired you can’t set them differently Default setting all speakers 10 ftSpeaker Distance Channel Level Discs to avoid Additional Information Taking care of your player and discsHandling discs Storing discsAdditional Information Standard TV users Resetting the playerAdditional Information Screen sizes and disc formats Widescreen TV usersBitstream*3 Additional Information About the audio output settingsCountry, Country code, Country code letter Additional Information Language code listCountry code list Language Language code letter, Language codeGlossary PCM Pulse Code Modulation Mpeg audioMpeg video Packed PCM DVD-Audio onlyAdditional Information Troubleshooting No audio, or audio is dis- torted No picture/No colorVideo OFF button Screen is stretched or aspect does not changeCD volume TruSurround Make sure that Audio Output Mode is set to 2 ChannelDisc containing the MP3 tracks won’t play Can’t hear effectGeneral Additional Information SpecificationsBel canto PLayer-1A Command Details and Explanation RS232-Interface Usage Details Command Command RS232 Hardware Connections

PL-1, PL-1A specifications

Bel Canto Design has long been synonymous with high-performance audio equipment, and its PL-1A and PL-1 models are no exception. These preamplifiers stand out in the world of high-fidelity audio for their refined technology, elegant design, and exceptional sound quality.

The Bel Canto PL-1A is a state-of-the-art digital preamplifier that caters to audiophiles demanding precision and versatility. It features a fully balanced signal path, which helps to minimize noise and distortion, ensuring that the music signal remains pure and unaltered. The PL-1A employs advanced digital signal processing technology, which not only enhances the audio performance but also provides a range of connectivity options to accommodate various audio sources.

One of the standout features of the PL-1A is its high-resolution asynchronous USB input, allowing users to connect their computers or digital audio players seamlessly. This input supports high sample rates, making it ideal for high-definition audio formats. Additionally, it includes multiple digital inputs such as coaxial and optical, along with analog inputs, providing flexibility for integrating different audio components.

The PL-1A also comes with an intuitive user interface, making it easy to navigate through the various settings and options. The remote control allows users to adjust volume levels, select inputs, and control other features without the need to get up from their listening position, enhancing the overall convenience.

The design of the PL-1A is not just functionally excellent but also visually appealing. Its sleek chassis is made of high-quality materials, giving it a premium look and feel that complements any audio setup. The attention to detail in both the design and craftsmanship ensures that it not only performs exceptionally well but also stands the test of time.

On the other hand, the Bel Canto PL-1 serves as a more traditional analog preamplifier, offering a warm, rich sound that many audiophiles crave. It features a robust power supply, low-noise circuits, and high-quality components that contribute to its stellar audio performance. The PL-1 is designed for both vinyl enthusiasts and digital audio lovers, providing inputs for turntables as well as digital sources.

Both models embody Bel Canto Design’s commitment to quality, innovation, and state-of-the-art audio technologies, making them ideal choices for anyone looking to elevate their listening experience. With their advanced features, aesthetic appeal, and superior sound quality, the Bel Canto PL-1A and PL-1 preamplifiers promise to satisfy even the most discerning audiophiles.