Bel Canto Design PL-1A manual Video Settings Menu Video Adjust Interlace Only, Standard Normal

Page 40

The Video Settings Menu

Video Adjust - Interlace Only

•Default setting: Standard

From the Video Adjust screen you can select the standard video presentation or define presets of your own.

1Press SETUP and select ‘Video Adjust’ from the on-screen display.

You can also access these settings by pressing V.ADJ (VIDEO ADJUST).

Audio Settings

Video Adjust

Play Mode

Disc Navigator

Initial Settings

Setup Navigator

2Use the joystick (left/right) to select a preset.

Video Adjust

Standard

•Standard – Normal

•I. Memory1–2Use for making your own interlaced presets (see below)

3Press ENTER to make the setting and exit the Video Adjust screen.

•Depending on the disc and the TV/ monitor, you may not see the effect clearly.

Creating your own interlace output presets

1Select one of the Memory presets (see above).

2Move the joystick down to select

‘Detailed Settings’ then press ENTER.

Video Adjust

I.Memory1

Detailed Settings

3 Adjust the picture quality settings.

Interlace Memory 1 (I. Memory 1)

Recall Settings

 

 

 

 

 

 

 

 

 

I.Memory1

 

 

 

 

 

 

 

 

 

 

Fine Focus

 

 

On

Contrast

min

 

 

max

Sharpness

soft

 

 

fine

Chroma Level

min

 

 

max

 

 

Hue

green

 

 

red

•Use the joystick (up/down) to select a setting.

•Use the joystick (left/right) to adjust the current setting.

•Press DISPLAY to switch between full and single view.

•You can change the preset number from the Recall Settings menu item.

You can adjust any or all of the following picture quality settings:

•Fine Focus – Switch On to reveal greater detail (high resolution) in the picture.

•Contrast – Adjusts the contrast between light and dark elements in the picture.

•Sharpness – Adjusts the sharpness of the mid-frequency (less detailed) elements in the picture. (This setting is only effective when Fine Focus is On.)

•Chroma Level – Adjusts how saturated colours appear.

•Hue – Adjusts the overall colour balance between red and green. (This is

07

composite video outputs.

397

51

En

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Rev.3 3/22/04 Table of Contents Congratulations Important Safety Instructions For U.S. model Important NoticeAdditional Saftey Requirements Before You Start Features DVD-Audio and Sacd compatibleGeneral Disc Compatibility Photo CD / DVD-RAM / DVD-ROMBefore You Start CDs, SACDs and Video CD are divided into tracksPage Page Controls and Displays Controls and Displays Remote control Enter & JoystickReturn Number buttonsPreset code list Setting up the Remote Control toGetting Started Using the on-screen displays Setting up with the Setup NavigatorSelect ‘Setup Navigator’ JoystickSelect a DVD language Getting StartedDid you connect this player to an AV receiver? Congratulations, setup is complete Getting Started Playing discs Basic playback controlsPress 0 OPEN/CLOSE to open the disc tray Load a disc Press 3 play to start playbackFront panel controls DVD disc menusStops playback ¢ Skips to the next track or chapterVideo CD PBC menus NumbersWhy won’t the disc I loaded play? Some MP3 tracks don’t show up. Where are they? Disc may have been illegally copiedUsing the Disc Navigator to browse the contents of a disc Playing Discs IntroductionFor CDs and Video CDs select a track MP3Playing Discs Scanning discs Using the Multi DialTo resume normal playback, press Play Playing Discs Playing in slow motion Frame advance/frame reversePress repeatedly to change the slow motion speed Slow motion speed is displayed on- screenPress Enter on ‘BEnd Point’ to set the loop end point Playing Discs Looping a section of a discPress Enter on ‘AStart Point’ to set the loop start point Playing Discs Using repeat play Playing Discs Using random play Select a random play optionRandom Title Random Chapter Random Off Random Group Random Track Random OffPlaying Discs Creating a program list Select ‘Create/Edit’ from the list of program optionsChapters/groups/folders/tracks Program list can contain up to 24 titlesTo play the program list, press Other functions available from the program menu Editing a program listSelect a program play function Playing Discs Searching a disc Press Enter to start playbackPlaying Discs Switching subtitles Switching DVD-Video audio languagePress Subtitle repeatedly to select a subtitle option Press Audio repeatedly to select an audio language optionPlaying Discs Switching DVD-RW audio channel Switching DVD-Audio audio channelSwitching CD/MP3/Video CD audio channel Switching camera anglesPlaying Discs Displaying disc information During PBC playback onlyAudio Settings Menu Audio DRC Audio Settings Menu Virtual Surround TruSurround’ or ‘Off’, as requiredAudio Settings Menu Set the distance for each speakerVideo Settings Menu Video Adjust Interlace Only Creating your own interlace output presetsUse the joystick left/right to select a preset Adjust the picture quality settingsCreating your own progressive output presets Video Settings MenuAjust the picture quality settings Initial Settings Menu Using the Initial Settings menu Digital Audio Out settingsDigital Out Dolby Digital Out427 Initial Settings Menu Video Output settingsTV Screen Video OutLanguage settings Default setting AutoDefault setting English Still PictureDefault setting English Default setting On Subtitle Language Auto LanguageDisplay settings DVD Menu LanguageSubtitle Display OSD LanguageAngle Indicator OptionsBackground Screen SaverSelect ‘Password’ Use the number buttons to enter a 4- digit passwordSelect ‘Password Change’ Enter a new passwordUse number buttons to enter your password, then press Enter Select ‘Level Change’Select a new level Select ‘Country Code’Bonus Group Auto Disc MenuGroup Playback DVD Playback Mode Default setting Single Default setting DVD-AudioDefault setting 2ch Area Sacd PlaybackInitial Settings Menu CD Playback Audio Output ModeSpeaker Installation SpeakersSpeaker Distance Default setting all speakers 10 ftL and R speakers are paired you can’t set them differently Channel Level Additional Information Taking care of your player and discs Handling discsStoring discs Discs to avoidAdditional Information Resetting the player Additional Information Screen sizes and disc formatsWidescreen TV users Standard TV usersAdditional Information About the audio output settings Bitstream*3Additional Information Language code list Country code listLanguage Language code letter, Language code Country, Country code, Country code letterGlossary Mpeg audio Mpeg videoPacked PCM DVD-Audio only PCM Pulse Code ModulationAdditional Information Troubleshooting No picture/No color Video OFF buttonScreen is stretched or aspect does not change No audio, or audio is dis- tortedCD volume Make sure that Audio Output Mode is set to 2 Channel Disc containing the MP3 tracks won’t playCan’t hear effect TruSurroundAdditional Information Specifications GeneralBel canto PLayer-1A Command Details and Explanation RS232-Interface Usage Details Command Command RS232 Hardware Connections

PL-1, PL-1A specifications

Bel Canto Design has long been synonymous with high-performance audio equipment, and its PL-1A and PL-1 models are no exception. These preamplifiers stand out in the world of high-fidelity audio for their refined technology, elegant design, and exceptional sound quality.

The Bel Canto PL-1A is a state-of-the-art digital preamplifier that caters to audiophiles demanding precision and versatility. It features a fully balanced signal path, which helps to minimize noise and distortion, ensuring that the music signal remains pure and unaltered. The PL-1A employs advanced digital signal processing technology, which not only enhances the audio performance but also provides a range of connectivity options to accommodate various audio sources.

One of the standout features of the PL-1A is its high-resolution asynchronous USB input, allowing users to connect their computers or digital audio players seamlessly. This input supports high sample rates, making it ideal for high-definition audio formats. Additionally, it includes multiple digital inputs such as coaxial and optical, along with analog inputs, providing flexibility for integrating different audio components.

The PL-1A also comes with an intuitive user interface, making it easy to navigate through the various settings and options. The remote control allows users to adjust volume levels, select inputs, and control other features without the need to get up from their listening position, enhancing the overall convenience.

The design of the PL-1A is not just functionally excellent but also visually appealing. Its sleek chassis is made of high-quality materials, giving it a premium look and feel that complements any audio setup. The attention to detail in both the design and craftsmanship ensures that it not only performs exceptionally well but also stands the test of time.

On the other hand, the Bel Canto PL-1 serves as a more traditional analog preamplifier, offering a warm, rich sound that many audiophiles crave. It features a robust power supply, low-noise circuits, and high-quality components that contribute to its stellar audio performance. The PL-1 is designed for both vinyl enthusiasts and digital audio lovers, providing inputs for turntables as well as digital sources.

Both models embody Bel Canto Design’s commitment to quality, innovation, and state-of-the-art audio technologies, making them ideal choices for anyone looking to elevate their listening experience. With their advanced features, aesthetic appeal, and superior sound quality, the Bel Canto PL-1A and PL-1 preamplifiers promise to satisfy even the most discerning audiophiles.
Top Page Image Contents