5 Player Controls (6)
A note regarding the automatic power saving
Once the player has been stopped for over ap- proximately five minutes, the system will enter “standby” mode and is prepared to respond im- mediately to a power up. In standby mode, power consumption is reduced to a minimum level to save power, the front LCD status win- dow will read “oFF”. The player could be turned back on by pressing the “POWER” button on the remote control or by switching the ON/OFF button on the left side of the player.
In the case battery pack is used for operating the player and the standby mode is activated for 10 seconds, the system will then totally cut down the power consumption, the front LCD status window will now go out, showing no mes- sages. The battery power is reserved.
If you plan to suspend use of the player for a significant period of time, it is recommended that the power cord (or batteries) be removed to prevent unnecessary power drain.
28 |
|