Basic Operation | Basic Playback |
Preparation before playing:
1.Connect the DVD player to your TV and amplifier.
2.Turn on the TV.
3.Set the TV to the AV input connected to the DVD player.
4.Turn down the volume on your amplifier, and then power it on.
5.Set the amplifier to the AV input connected to the DVD player.
|
|
|
|
|
|
|
|
| |
|
|
|
|
| 1 | MIC IN | 2 | MIC VOL | MIC ECHO |
|
| POWER |
|
|
|
|
|
|
|
ON | OFF | PAUSE | STOP | PLAY | OPEN/CLOSE |
|
|
|
|
|
|
|
|
|
|
|
|
|
Remote Control Operation | Advanced Features |
During DVD or CD playback, press and hold 
to scan forward. The player will review the disc at 2, 4, 8 and 20 times normal speed as follows:
X2 
X4 
X8 
X20
Press PLAY to resume normal playback.
During DVD or CD playback, press and hold 
to scan in reverse.
The player will review the disc at 2, 4, 8 and 20 times normal speed as follows:
X20
Press PLAY to resume normal playback.
STEP 1 - Press POWER to start the player. The DVD logo appears on the TV screen.
STEP 2 - Press OPEN/CLOSE either on the front panel or remote control. When the tray is opened, place the disc on the tray with the label side up. Press OPEN/ CLOSE again to close the disc tray.
STEP 3 - Press the PLAY button on the front panel or remote con- trol. The player will automatical- ly read and identify the disc, and begin playback.
PREV
Press PREV to skip to previous chapter or track.
NEXT
Press NEXT to skip to the next chapter or track.
STOP
Press STOP to stop and hold playback.
Press RESUME to resume playback from the point you pressed STOP.
Note: The screen saver will automatically turn on if playback is
stopped about 5 minutes(when Screen Saver is set to on).
12 | 21 |