Erase/Write, Power Button, REW Rewind Button

the VOLUME UP/DOWN buttons to adjust the setting. The display will auto- matically turn off if no adjustments are made within 6 seconds, or if any other button is depressed.

11. ERASE/WRITE

When tuned to a channel, press this button to store or erase the channel from memory. The stored channel numbers are displayed in “GREEN” on the screen, and the non-stored channel numbers are in “RED”. When using the CHANNEL UP/DOWN buttons, with the skip mode on, the VE-560 will tune only to the stored channels .

The following buttons are used for the connected Video Cassette Player (VCP) that can be supplied by Audiovox’s detailers.

I. REMOTE CONTROLLED VIDEO CASSETTE PLAYER FUNCTIONS

The VE-560’s remote control incorporates functions for operating an optional Audiovox VCP. Due to the directional nature of infrared remote controls, be certain to point the remote control at the sensor on the VCP, when attempting to control it. These features can only be used with Audiovox Video Cassette Players. When using another brand VCP, its own remote control must be used. For more information regarding the use of VCPs, refer to the associated Owner’s Manual.

12.POWER BUTTON

This button is used to turn the VCP on and off.

13.“REW” REWIND BUTTON

If this button is pushed while the tape is stopped, the tape will rewind. If this button is pushed while the tape is playing, the VCP will go into rewind search mode.

14.PLAY BUTTON

Press this button to activate play mode while a tape is loaded into the VCP. This button may also be used to disengage search and pause modes.

15.“F.FWD.” FAST FORWARD BUTTON

If this button is pushed while the tape is stopped, tape will fast forward. If this button is pushed while the tape is playing, the VCP will go into fast forward search mode.

16.REPLAY BUTTON

Pressing this button will rewind tape and immediately begin playback when the tape is fully rewound.

17.STOP BUTTON

Press this button to stop the tape.

8	128-6317