Hdmi Connections, About Hdmi | Adcom GDV-870 specs

HDMI Connections

2-Channel Audio Connections

About HDMI

HDMI, or High Deﬁnition Multimedia Interface, is an advanced audio/video connection method that trans- fers full-bandwidth digital audio and video signals over a single cable.

As a result, digital signals can pass unfettered from your GDV-870 to an HDMI-compatible display for su- perior picture and sound quality.

Connecting HDMI Components

1Using an HDMI cable, connect the HDMI output on the GDV-870 to the corresponding HDMI input on your digital display device.

Connecting Analog Audio

Using the analog audio output allows the internal DSP and DACs to decode and convert the data from the disc to analog signals.

This output is used when connecting the player to an analog stereo preamp, and is necessary for use in many distributed audio setups. This output can also make use of analog direct modes available on many Adcom preampliﬁers.

1Using RCA cables, connect the audio outputs on the GDV-870 to the audio inputs on your display device or receiver.

•Be sure to match the red (right) and white (left) connectors accordingly.

HDMI	2-Channel
Output	Audio Out

Chapter 2 - Connections

				��	��		��
				��	�	��	��
				��	�	��	��
��	��
��	�	��	��	��	�	��	��

Notes:

•You must have an HDMI display device to view HDMI signals from the DVD player.

•You must set the Video Output to HD in the GDV-870 Setup Menu; see page 20.

•You should also set the HD Resolution to match the native resolution of your display; see page 20.

•To view the HDMI output, select the correspond- ing HDMI input on your display device.

		��	��		��
		��	�	��	��	��
		��	�	��	��	��
��
							��	��
��	��	��	�	��	��	��	��	��
��	��	��	�	��	��	��	��	��

Notes:

•No conﬁguration is necessary for the 2-Channel Audio Out.

•To listen to the 2-Channel Audio Out, select the corresponding input on your display device or receiver.

www.adcom.com

GDV-870 Owner’s Manual