Chapter 3 - Setup
Audio Settings (cont.)
Digital Audio Output
Sets the audio signal from the coaxial and optical digital audio outputs.
•Use the / buttons to select Off, PCM, or All.
-Select “Off” if you are not using the digital audio outputs.
-Select “PCM” (or Pulse Code Modulation) if the digital audio output is connected to a 2- channel digital AV preamp.
-Select “All” if the digital audio output is con- nected to an AV preamp with a Dolby Digital or DTS surround sound processor.
Night Mode
Reduces the dynamic range (the difference between the softest and loudest audio portions) of a DVD sound track. This is a convenient feature for watch- ing movies late at night.
•Use the / buttons to select On or Off.
Down Sampling
Down samples high definition audio signals if your AV preamp is not capable of decoding them.
•Use the / buttons to select On or Off.
-Select “On” if your preamp is NOT capable of handling 96 kHz signals. The DVD Player will automatically down sample any 96 kHz signals to 48 kHz so your system can decode them.
-Select “Off” if your preamp is capable of handling 96 kHz signals. The DVD Player will pass the signal through without any further processing.
Smart Sound
Provides a variety of preset tone control options by musical genre.
•Use the / buttons to select Off, Classical, Rock, Jazz, or Pop.
Language | Bass management | : Off | |
Front speakers | : Large | ||
| |||
Video | Center Speakers | : None | |
|
| ||
| Surround Speakers | : None | |
Audio | Subwoofer | : None | |
Test tones | : Off | ||
| |||
Rating | Center delay | : No Delay | |
Surr. Delay | : No Delay | ||
| |||
Misc | Digital Output | : PCM | |
|
| ||
| Night Mode | : Off | |
| Down sampling | : On | |
| Smart Sound | : Off |
Notes:
• You can use the Digital | off | on |
Audio Out buttons as a | ||
shortcut to enable/dis- | dig audio out | |
able the digital audio | ||
signal.
22