SCD-XA5400ES Section Test Mode, Procedure, Cold Reset

SCD-XA5400ES

SECTION 4 TEST MODE

Note 1: According to the following procedures when you ship it (Return it to the customer).

1.SERVICE MODE of step 6 and 7 (DVD EEPROM clearness)

2.COLD RESET

Note 2: “DVD” displayed by the test mode shows "super audio CD”.

COLD RESET

The cold reset clears data stored in microcomputer’s RAM to ini- tial conditions.

Procedure:

1.Press three buttons of [x], [A] and [?/1] on the set simultane- ously.

2.“COLD RESET” appears on the ﬂuorescent indicator tube. Af- ter that, the ﬂuorescent indicator tube becomes blank then the system becomes standby states.

PANEL TEST

Procedure:

1.Press the [?/1] button to turn on.

2.Press three buttons of [x], [. AMS >, PUSH ENTER] and [?/1] on the set simultaneously.

3.All segments turned on.

4.When [x] button on the set is pressed after half segments in ﬂuorescent indicator tube light up. If you press [x] button on the set again, another half segments in ﬂuorescent indicator tube light up. Pressing [x] button on the set again would cause all segments in ﬂuorescent indicator tube light up.

5.Press [N] button on the set, in the key check mode, the ﬂuo- rescent indicator tube displays “K0 J0”.

6.Each time an another button is pressed, “KEY” value increas- es. However, once a button is pressed, it is no longer taken into account. When all keys are pressed correctly, “K10” and “OK” are alternately displayed.

7.When the [. AMS >, PUSH ENTER] dial on the set is turned in the direction of right,“J0” is changed to “J1”, then ...

“J9”. When the [. AMS >, PUSH ENTER] dial on the set is turned in the direction of left, “J0” is changed to “J9”, then ... “J0”.

8.To release from this mode, press three buttons in the same manner as step 1.

CDM TEST

Aging test mode of CDM.

Procedure:

1.Press three buttons of [X], [A] and [?/1] on the set simultane- ously.

2.After the “Open” display blinks, “SINGLE LOADING” is dis- played on the ﬂuorescent indicator tube.

3.Press [. AMS >, PUSH ENTER] and then aging starts.

4.To stop aging, Press [x] button.

5.To release from this mode, press three buttons of [X], [A] and [?/1] on the set simultaneously.

SERVICE MODE

When HDMI is connected in this mode, various information is dis- played on the ﬂuorescent indicator tube. Refer to the following table for displayed various information.

EEPROM CLEAR

Procedure:

1.Press two buttons of [x] and [A] on the set simultaneously for 3 seconds.

2.Various information is displayed on the ﬂuorescent indicator tube.

3.When [R] button is pressed of the remote commander. Reboot- ing emergence fuctor appears of toggle article number on the ﬂuorescent indicator tube.

4.When [t] button is pressed of the remote commander. MTK communication error factor appears of toggle article number on the ﬂuorescent indicator tube.

5.When [r] button is pressed of the remote commander. Power ON/OFF error factor appears of toggle article number on the ﬂuorescent indicator tube.

6.Press the button in order of the [4] t [Time/Text] t [CLEAR] on the remote commander of attachment.

7.The message “Complete” is displayed on the ﬂuorescent indi- cator tube, and DVD EEPROM is cleared.

8.To release from this mode, disconnect the power cord.

Note: Don't press the [?/1] button when to release from this mode. Necessarily disconnect the power cord. The set doesn't operate when turning off power with [?/1] button of the set.

2008H05-1, SCD-XA5400ES specifications

The Sony SCD-XA5400ES is a high-end Super Audio CD (SACD) player that made its debut in 2008, quickly establishing itself as a premier choice for audiophiles and music enthusiasts. Combining cutting-edge technology with elegant design, the XA5400ES exemplifies Sony's commitment to audio excellence.

One of the standout features of the SCD-XA5400ES is its capability to play not just standard CDs, but also SACDs, which offer significantly higher resolution audio. This player is equipped with a Dual Discrete Direct Circuit configuration for a cleaner audio path and reduced interference. As a result, it delivers exceptional sound clarity and detail, allowing listeners to experience music as it was intended by the artists.

The XA5400ES utilizes a top-of-the-line D/A converter, the Cirrus Logic CS4398, which supports high-resolution audio processing. This converter ensures outstanding audio performance, providing a dynamic range and impressive low distortion figures. The player also features a sophisticated digital signal processing system, which includes multiple digital filters that let audiophiles tailor their listening experience according to their preferences.

In addition to its audio prowess, the SCD-XA5400ES is designed with robust construction meant to minimize vibrations and mechanical noise. This attention to physical integrity is evident in its solid chassis and premium components, which work together to create an ideal environment for high-fidelity playback.

For connectivity, the XA5400ES provides an array of outputs, including balanced XLR outputs, RCA outputs, and a digital output for those needing to connect to external DACs or processors. With these options, the player is highly versatile, capable of integrating seamlessly into various audio systems.

Moreover, the player supports both stereo and multi-channel SACD playback, allowing users to delve into a more immersive sonic landscape. Whether enjoying orchestral pieces or rock concerts, the SCD-XA5400ES enhances the listening experience through its nuanced sound staging and three-dimensional audio reproduction.

In conclusion, the Sony SCD-XA5400ES stands out as a benchmark in the realm of high-quality audio playback. With its advanced technologies, exceptional sound quality, and robust build, it caters to the needs of discerning listeners who seek the ultimate in home audio performance. As a part of Sony's dedicated ES (Elevated Standard) lineup, it emphasizes the brand's expertise in delivering products that merge technical sophistication with a passion for music.