Sony SCD-XA5400ES DVD Service Mode General Description, Enterring DVD Service Mode Procedure

Page 14

SCD-XA5400ES

DVD SERVICE MODE

Note: DVD SERVICE MODE is a service mode of super audio CD.

When the DVD service mode is operated, the following, remote commander is necessary.

(The DVD service mode cannot be operated by remote commander to which this machine is attached)

Remote commander (RM-ASP003) (for US, Canadian models): Part No. 1-479-272-11

Remote commander (RM-ASP004) (for AEP model): Part No. 1-479-272-21

Note: Above-mentioned remote commander is one example. If it is the one printed under a remote commander as "DVD", any remote com- mander can be operated.

1. DVD Service Mode General Description

This mode let you make diagnosis and adjustment easily by us- ing the remote commander and the TV screen for HDMI input. The instructions, diagnostic results, etc. are given on the on-screen display.

Be sure to execute the IOP measurement when a base unit is re- placed.

2.Enterring DVD Service Mode Procedure:

1.Press the [?/1] button to turn the power on.

2.Press two buttons of [x] and [A] on the set simultaneously for 3 seconds

3.The message “SERVICE IN” appears on the fluorescent in- dicator tube and top menu of the Remocon Diagnosis Menu appears on the on-screen display on the TV screen for HDMI input as follows. The model name, IF-con version and Syscon version are displayed at the bottom of the on-screen display.

Remocon Diagnosis Menu

0.External Chip Check

1.Servo Parameter Check

2.Drive Manual Operation

3.Emergency History

4.Version Information

Model Name :xxxx_xx

IF-con:Ver.xx.xx(xxxx)

Syscon:Ver.x.xxx

4.To execute each function, press its number by using numeric button on the remote commander.

5.To release from this mode, disconnect the power cord.

Note: Don't press the [?/1] button when to release from this mode. Necessarily disconnect the power cord. The set doesn't operate when turning off power with [?/1] button of the set.

3. Executing IOP Measurement

In order to execute IOP measurement, the following standard pro- cedures must be followed.

Procedure:

1.From the top menu of Remocon Diagnosis Menu, select “2 Drive Manual Operation” by pressing the [2] button on the remote commander. The following screen appears on the on- screen display

Drive Manual Operation

1.Servo Control

2.Track/Layer Jump

3.Manual Adjustment

4.Mecha test mode

5.MIRR time Adjust

0.Return to Top Menu

2.Select “3. Manual Adjustment” by pressing the [3] button on the remote commander. The following screen appears on the on-screen display.

Manual Adjust

1.Track Balance Adjust:

2.Track Gain Adjust:

3.Focus Balance Adjust:

4.Focus Gain Adjust:

5.Eq Boost Adjust:

6.Iop:

7.TRV. Level:

8.S curve(FE) Level:

9.RFL(PI) Level:

0. MIRR Time:

[V][v] Change Value [RETURN]Return to previous menu

3.Select “6. Iop:” by pressing [6] button on the remote com- mander.

4.Wait until a hexadecimal number appear in the on-screen dis- play as below.

Manual Adjust

1.Track Balance Adjust:

2.Track Gain Adjust:

3.Focus Balance Adjust:

4.Focus Gain Adjust:

5.Eq Boost Adjust:

6.Iop: xx

7.TRV. Level:

8.S curve(FE) Level:

9.RFL(PI) Level:

0. MIRR Time:

[V][v] Change Value [RETURN]Return to previous menu

5.Convert data from hexadecimal to decimal by using conver- sion table.

6.If the value is smaller than 93 (decimal), then it is OK. How- ever if the value is higher than 93, then BU (base unit) is defec- tive and need to be change.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents CDM66F-DVBU101 889-205-01NEW KHM-313CABFlexible Circuit Board Repairing SCD-XA5400ESDiagrams Table of ContentsDisassembly Exploded ViewsSCD-XA5400ES Section Servicing Notes Rear ViewHOW to Open the Tray When Power Switch Turns OFF SCD-XA5400ES Section GeneralRemote Case SCD-XA5400ES Section DisassemblyDisassembly Flow Loading Panel Assy Front Panel AssyMain Board Mechanism Deck CDM66F-DVBU101Motor BOARD, Motor L Assy Loading Base Unit BlockCold Reset SCD-XA5400ES Section Test ModeProcedure Content List of trouble logExecuting IOP Measurement DVD Service Mode General DescriptionEnterring DVD Service Mode Procedure Time of error code Error codeParameter of error code Checking Emergency HistoryTo Return to the Top Menu of Remocon Diagnosis Menu Section Electrical AdjustmentTo Execute the Initialize Setup Data Procedure Checking Version InformationSCD-XA5400ES Section Diagrams Block Diagram SA-CD/CD Servo SectionBlock Diagram Hdmi Section SD-RAMBlock Diagram Main Section Signal PathBlock Diagram PANEL, Power Supply Section Circuit Boards Location For Printed Wiring BoardsFor Schematic Diagrams Printed Wiring Board Main /2 Semiconductor LocationOUT SW Board Schematic Diagram Main /4 Main BoardMain Board 2/4 IC1105 Schematic Diagram Main /4 See page 38 for IC Block Diagrams Main BoardPrinted Wiring Board Audio /2 Audio Board Component SideSCD-XA5400ES Schematic Diagram Audio /2 See page 38 for waveforms See page 38 for IC Block DiagramsAudio Board Printed Wiring Boards Panel Section SemiconductorSchematic Diagram Display Board IC801Schematic Diagram KEY Section LED BoardPower Board Schematic Diagram Power BoardSchematic Diagram Standby Board Standby BoardIC51 Audio Board IC Block Diagrams Main BoardWaveforms Main Board Display BoardTC7W74FU Power Board Standby BoardIC Pin Function Description PLLICI2CSDA KeyintLedlat PLLICI2CSCLRfgc DirerrorOSC IrefXRD XromcsHA1 DvssTxcn ExtcapAGND3, AGND18 TxcpSADCVDD18 ADACVDD1ADACVDD2 SADCVSS18KNOB, Balance White . . . RED Section Exploded ViewsCase Section Panel ASSY, LoadingSPRING, Ring Display Board SectionKnob HP-VOL 58 A-1544-255-A Display BOARD, CompleteBase R, Panel Front Panel SectionPANEL, Front AEP Main Board Section Audio Board Section Screw +BVTT 4X16 S Chassis SectionFoot Assy Screw +BVTP 3X6 TYPE2 IT-3Belt LD Mechanism Deck Section CDM66F-DVBU101Pulley LD Gear LDBase Unit Section Section Electrical Parts List SCD-XA5400ES AudioPIN, Connector 3P Diode Plug Micro Connector 4PPLUG, Connector 2P TerminalAudio Display HP JOG KEY-L KEY-R LED Main Main PIN, Connector 5P Plug Micro Connector 10PPIN, Connector 6P Hdmi Connector Hdmi OUT47K 10W R1151 216-833-11 Main Motor OUT-SW Power Standby Memo SCDXA5400ES Revision History Ver Date Description of Revision

2008H05-1, SCD-XA5400ES specifications

The Sony SCD-XA5400ES is a high-end Super Audio CD (SACD) player that made its debut in 2008, quickly establishing itself as a premier choice for audiophiles and music enthusiasts. Combining cutting-edge technology with elegant design, the XA5400ES exemplifies Sony's commitment to audio excellence.

One of the standout features of the SCD-XA5400ES is its capability to play not just standard CDs, but also SACDs, which offer significantly higher resolution audio. This player is equipped with a Dual Discrete Direct Circuit configuration for a cleaner audio path and reduced interference. As a result, it delivers exceptional sound clarity and detail, allowing listeners to experience music as it was intended by the artists.

The XA5400ES utilizes a top-of-the-line D/A converter, the Cirrus Logic CS4398, which supports high-resolution audio processing. This converter ensures outstanding audio performance, providing a dynamic range and impressive low distortion figures. The player also features a sophisticated digital signal processing system, which includes multiple digital filters that let audiophiles tailor their listening experience according to their preferences.

In addition to its audio prowess, the SCD-XA5400ES is designed with robust construction meant to minimize vibrations and mechanical noise. This attention to physical integrity is evident in its solid chassis and premium components, which work together to create an ideal environment for high-fidelity playback.

For connectivity, the XA5400ES provides an array of outputs, including balanced XLR outputs, RCA outputs, and a digital output for those needing to connect to external DACs or processors. With these options, the player is highly versatile, capable of integrating seamlessly into various audio systems.

Moreover, the player supports both stereo and multi-channel SACD playback, allowing users to delve into a more immersive sonic landscape. Whether enjoying orchestral pieces or rock concerts, the SCD-XA5400ES enhances the listening experience through its nuanced sound staging and three-dimensional audio reproduction.

In conclusion, the Sony SCD-XA5400ES stands out as a benchmark in the realm of high-quality audio playback. With its advanced technologies, exceptional sound quality, and robust build, it caters to the needs of discerning listeners who seek the ultimate in home audio performance. As a part of Sony's dedicated ES (Elevated Standard) lineup, it emphasizes the brand's expertise in delivering products that merge technical sophistication with a passion for music.
Top Page Image Contents