Flexible Circuit Board Repairing

SCD-XA5400ES

NOTES ON CHIP COMPONENT REPLACEMENT

•Never reuse a disconnected chip component.

•Notice that the minus side of a tantalum capacitor may be dam- aged by heat.

•Keep the temperature of soldering iron around 270 °C during repairing.

•Do not touch the soldering iron on the same conductor of the circuit board (within 3 times).

•Be careful not to apply force on the conductor when soldering or unsoldering.

CAUTION

Use of controls or adjustments or performance of procedures other than those speciﬁed herein may result in hazardous radia- tion exposure.

This appliance is classified as a CLASS 1 LASER product. This marking is located on the rear exterior.

SAFETY CHECK-OUT

After correcting the original service problem, perform the follow- ing safety check before releasing the set to the customer:

Check the antenna terminals, metal trim, “metallized” knobs, screws, and all other exposed metal parts for AC leakage.

Check leakage as described below.

LEAKAGE TEST

The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes.). Leakage current can be measured by any one of three methods.

1.A commercial leakage tester, such as the Simpson 229 or RCA WT-540A. Follow the manufacturers’ instructions to use these instruments.

2.A battery-operated AC milliammeter. The Data Precision 245 digital multimeter is suitable for this job.

3.Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The “limit” indication is 0.75 V, so analog meters must have an accurate low-voltage scale. The Simpson 250 and Sanwa SH-63Trd are examples of a passive VOM that is suitable. Nearly all battery operated digital multimeters that have a 2 V AC range are suitable. (See Fig. A)

To Exposed Metal

Parts on Set

		AC


0.15 μF	1.5 kΩ	voltmeter
		(0.75 V)

Earth Ground

Fig. A. Using an AC voltmeter to check AC leakage.

SAFETY-RELATED COMPONET WARNING!

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN

THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

ATTENTION AU COMPOSANT AYANT RAPPORT

À LA SÉCURITÉ!

LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR

LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC- TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON- NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.

2008H05-1, SCD-XA5400ES specifications

The Sony SCD-XA5400ES is a high-end Super Audio CD (SACD) player that made its debut in 2008, quickly establishing itself as a premier choice for audiophiles and music enthusiasts. Combining cutting-edge technology with elegant design, the XA5400ES exemplifies Sony's commitment to audio excellence.

One of the standout features of the SCD-XA5400ES is its capability to play not just standard CDs, but also SACDs, which offer significantly higher resolution audio. This player is equipped with a Dual Discrete Direct Circuit configuration for a cleaner audio path and reduced interference. As a result, it delivers exceptional sound clarity and detail, allowing listeners to experience music as it was intended by the artists.

The XA5400ES utilizes a top-of-the-line D/A converter, the Cirrus Logic CS4398, which supports high-resolution audio processing. This converter ensures outstanding audio performance, providing a dynamic range and impressive low distortion figures. The player also features a sophisticated digital signal processing system, which includes multiple digital filters that let audiophiles tailor their listening experience according to their preferences.

In addition to its audio prowess, the SCD-XA5400ES is designed with robust construction meant to minimize vibrations and mechanical noise. This attention to physical integrity is evident in its solid chassis and premium components, which work together to create an ideal environment for high-fidelity playback.

For connectivity, the XA5400ES provides an array of outputs, including balanced XLR outputs, RCA outputs, and a digital output for those needing to connect to external DACs or processors. With these options, the player is highly versatile, capable of integrating seamlessly into various audio systems.

Moreover, the player supports both stereo and multi-channel SACD playback, allowing users to delve into a more immersive sonic landscape. Whether enjoying orchestral pieces or rock concerts, the SCD-XA5400ES enhances the listening experience through its nuanced sound staging and three-dimensional audio reproduction.

In conclusion, the Sony SCD-XA5400ES stands out as a benchmark in the realm of high-quality audio playback. With its advanced technologies, exceptional sound quality, and robust build, it caters to the needs of discerning listeners who seek the ultimate in home audio performance. As a part of Sony's dedicated ES (Elevated Standard) lineup, it emphasizes the brand's expertise in delivering products that merge technical sophistication with a passion for music.