A M A C O M
Cyberlink PowerDVD - PC Only
E Z D V D + R W
1.Insert the Cyberlink PowerDVD installation CD into your CD drive.
2.The Cyberlink installation program should launch automatically and ask you if you want to install the software.
3.Click “Yes” and follow the on screen instructions on screen to complete the installation.
4.When the installation is finished you may be asked to reboot. You should answer Yes to this, as the software will not work otherwise.
You will find detailed User Manuals for Cyberlink PowerDVD on the installation CD. We would advise all users to read these before using the software to ensure that they benefit from the full range of
U S I N G Y O U R E Z D V D + R W D R I V E
Inserting Discs Into The Drive
1.Press the tray eject button in the bottom right hand corner of the drive once.
2.The tray will eject from the drive.
3.Place the disc that you want to use on to the tray, ensuring that it is placed with the label side facing upwards and located within the circular locating slot.
4.Do not push the tray back into the drive using your hand, you should always use the eject button by pressing it once to return the tray back into the drive.
5.Your disc is now ready for use.
Emergency Ejection of Discs
1.Ensure that the power cable is disconnected from your EZDVD+RW unit
2.Place a straightened out paperclip into
the small hole situated at the front of the unit.
3.The tray should eject and you will now be
able to remove any discs that were stuck inside the unit.
11