Onkyo Powering Up & Setting Up the DV-CP702, Powering Up the DV-CP702, First Time Setup

￿

 ￿     ￿   ￿  ￿ ￿

Powering Up & Setting Up the DV-CP702

STANDBY/ON	ON	STANDBY
	ON STANDBY
			OPEN/
			CLOSE
	SEARCH	LAST M MEMORY CHAIN MODE
			REPEAT
	1	2	3
			A-B
	4	5	6
			RANDOM
	7	8	9
			DISPLAY
	+10	0	CLEAR
	TOP MENU		MENU
	ENTER		ENTER
STANDBY indicator	RETURN		SETUP
	AUDIO	ANGLE SUBTITLE

Powering Up the DV-CP702

Before connecting the power cord, connect all your AV com- ponents (see page 16 to page 19).

Don’t forget to turn on your TV or projector and select the video input to which the DV-CP702 is connected.

If you’re using a hi-fi amp, AV receiver, or surround sound decoder for audio playback, turn that on as well and select the audio input to which the DV-CP702 is connected.

1	Connect the power cord to a suit-
	able wall outlet.
	The DV-CP702 enters Standby mode, and
	the STANDBY indicator comes on.

Here you need to specify the size of your TV (standard 4:3 or widescreen 16:9), select a language for the onscreen setup menus, and configure the digital audio output. You can change these settings later by using the onscreen setup menus (see page 38).

1	Use the remote controller’s Up/
	Down [ ]/[ ] buttons to select a TV
Remote controller
	shape, and then press [ENTER].
ENTER	See page 39 for more information on the
	TV Shape options.
	The On-Screen Language menu appears.
2	Select a language, and then press
	[ENTER].
Remote controller
	See page 41 for more information on the
ENTER	language options.
	The Digital Out–>Dolby Digital menu
	appears.
3	Select a Dolby Digital option, and
	then press [ENTER].
Remote controller
	See page 41 for more information on the
ENTER	digital audio output options.
	The Digital Out–>Linear PCM Out menu
	appears.
4	Select a Linear PCM Out option,
	and then press [ENTER].

2

Remote controller

ON STANDBY

To turn on the DV-CP702, press the [STANDBY/ON] button (or the remote controller’s [ON] button).

The DV-CP702 comes on, the display lights up, and the STANDBY indicator goes off.

To turn off the DV-CP702, press the [STANDBY/ON] button (or the remote controller’s [STANDBY] button). The DV-CP702 enters Standby mode and the STANDBY indicator comes on.

Remote controller
	The Digital Out–>MPEG Out menu
ENTER	appears.
5	Select an MPEG Out option, and
	then press [ENTER].
Remote controller
	The Digital Out–>Digital Out menu
ENTER	appears.
6	Select a Digital Out option, and

First Time Setup

The very first time you turn on your DV-CP702, the Initial Setup menu appears onscreen, as shown.

Initial Setup
TV Shape	4:3 Letter box
On-Screen Language	4:3 Normal
Digital Out	16:9 Widescreen
	16:9 Compressed

Sets aspect ratio of connected TV.

ENTER Selection

20

Remote controller then press [ENTER].

The Initial Setup menu closes.

ENTER

Your DV-CP702 is now ready for use. See page 21 for infor- mation on loading discs, and page 22 for information on selecting and playing discs.

Notes:

•You can change the language of the onscreen setup menus, and your preferred languages for DVD menus, foreign lan- guage soundtracks, and subtitles individually on the Lan- guage page of the onscreen setup menus (see page 41).

•Not all DVD-Video discs have multi-language menus, for- eign language soundtracks, and subtitles. In such cases, the disc’s default language is used.