Onkyo Configuring the DV-CP702 Audio Menu, Language Menu, Digital Out, On-Screen Language

Page 41

￿   ￿     ￿   ￿  ￿ ￿

Configuring the DV-CP702—Continued

Audio Menu

Digital Out

With these settings you can specify how the DV-CP702 out- puts digital audio signals. The options you choose will depend on the type of AV component that you connect to the DV-CP702’s digital audio outputs.

Dolby Digital Out

DVD

With this setting you can configure the DV-CP702 to output Dolby Digital audio as it is or downmix it to 2-channel PCM.

If you’re connecting the DV-CP702’s digital audio outputs to an AV component with a built-in Dolby Digital decoder, select Dolby Digital. If you’re connecting to a hi-fi amp with a digital input, an AV receiver with a built-in Dolby Pro Logic decoder, or an external D/A converter, select Dolby Digital > PCM.

Dolby Digital (default): Dolby Digital audio is output as it is.

Dolby Digital > PCM: Dolby Digital audio is downmixed and output as 2-channel PCM digital audio.

Linear PCM Out

DVD

With this setting you can configure the DV-CP702 to output digital audio with higher sampling rates (e.g., 96 kHz) as it is or downsample it to 48 kHz.

If the AV component you connect to the DV-CP702’s digital audio outputs supports 96 kHz digital audio, select Down Sample Off. Otherwise, select Down Sample On.

Down Sample On (default): 96 kHz digital audio is downsampled and output at 48 kHz.

Down Sample Off: 96 kHz digital audio is output as it is.

Notes:

Digital Out

DVD VCD CD MP3 WMA

With this setting you can turn the coaxial and optical digital audio outputs on or off.

Depending on how you connect the DV-CP702 to your other AV components, there may be situations where it’s helpful to be able to turn off the digital audio outputs.

On (default): Digital audio signals are output by the coaxial and optical digital audio outputs.

Off: Nothing is output by the coaxial and optical digital audio outputs.

Notes:

• This setting has no effect on the analog audio outputs.

Dynamic Range Control (Dolby Digital only)

DVD

With the Dynamic Range Control function you can reduce the dynamic range of Dolby Digital material so that you can still hear quiet parts even when listening at low volume lev- els—ideal for watching movies late at night when you don’t want to disturb anyone.

Off (default): The full dynamic range is preserved.

On: The dynamic range of Dolby Digital material is com- pressed.

Notes:

The impact of the Dynamic Range Control function depends on the Dolby Digital material that you are playing and with some material there will be little or no effect.

Language Menu

On-Screen Language

Some copy-protected DVD-Video discs may use 96 kHz digital audio only for A/D conversion to the analog audio outputs.

With some discs, even if you select Down Sample Off, the digital audio will be downsampled to 48 kHz, and in some cases may not be output by the DV-CP702’s digital audio outputs.

MPEG Out

DVD VCD

With this setting you can configure the DV-CP702 to output MPEG digital audio as it is or downmix it to PCM.

If you’re connecting the DV-CP702’s digital audio outputs to an AV component with a built-in MPEG decoder, select MPEG. Otherwise, select MPEG > PCM.

MPEG (default): MPEG digital audio is output as it is.

MPEG > PCM: MPEG digital audio is downmixed and output as PCM digital audio.

DVD VCD CD MP3 WMA JPEG

With this setting you can select a language for the onscreen setup menus and messages.

English (default): English.

Français: French.

Español: Spanish.

Deutsch: German.

Italiano: Italian.

41

Image 41
Contents DV-CP702 Contents Important Safety Instructions Sur les modèles dont la fiche est polarisée PrecautionsFor models having a power cord with a polarized plug Power WarrantyInstalling this Unit Region NumbersIntroduction Supplied AccessoriesDV-CP702 Features Disc Content Organization Unsupported DVD FeaturesIntroduction Disc Notes DVD Region Numbers Supported DiscsIntroduction Cleaning DiscsVideo CDs Handling DiscsCopyright DV-CP702-related TerminologyStoring Discs Front Panel Controls & ConnectorsControls & Connectors Display Power cord Controls & Connectors Rear PanelControls & Connectors Remote Controller Controls & Connectors Open the battery compartment, as shown Before Using the DV-CP702Accordance with the polarity diagram inside Battery compartment Close the battery compartmentAV Cables & Connectors Connecting the DV-CP702Before Making Any Connections Optical Digital InputsTurn off the DV-CP702 and your TV, and dis Connecting the DV-CP702 Connecting Your TV or ProjectorLets Connect the DV-CP702 to your TV as shownConnecting for Dolby Digital or DTS Connecting the DV-CP702 Connecting Your Hi-Fi AmpAnalog Connection Digital ConnectionConnection Diagram Connecting -compatible AV ComponentsFirst Time Setup Powering Up & Setting Up the DV-CP702Powering Up the DV-CP702 Loading Discs During Playback Basic PlaybackLoading & Removing Discs Selecting Discs Starting, Pausing & Stopping PlaybackBasic Playback               Or Video CD Navigating Disc MenusLoad and select a DVD-Video disc Use the number buttons to specify a chapter or title Selecting Titles & Chapters by NumberPress the Play or Enter but Ton to start playback of the speciUsing the Disc Navigator With the Disc Navigator open, press the Memory button Basic Playback Memory Playback in the Disc NavigatorPlaylist appears in place of the file information To start memory playback, pressFast Forward & Reverse Selecting Tracks by NumberFrame-by-Frame Playback Adjusting the Display BrightnessSlow-motion Playback Using Chain Mode Using Jpeg CDsRepeat Playback Advanced PlaybackLocating Specific Points in Time Random Playback Advanced PlaybackMemory Playback Selecting Camera Angles Selecting Subtitles Using Progressive ScanningSelecting Languages & Audio Formats Using Last Memory Advanced Playback Displaying Information To cancel the information displayDuring playback, press the DIS Press the Display button againConfiguring the DV-CP702 Menu Setting Description PictureTV Shape Using the Onscreen Setup MenusPicture Menu Progressive Setting Interlaced SettingPAL Output Setting Australian model only Language Menu Configuring the DV-CP702 Audio MenuDigital Out Dynamic Range Control Dolby Digital onlyDisplay Menu Screen Saver Operation Setting MenuPause/Still Parental LockInitial Setup Menu Language Code ListAuto Power Off Selecting Other LanguagesTroubleshooting Troubleshooting Component Video SpecificationsOnkyo U.S.A. Corporation