Onkyo DV-CP702 instruction manual Connecting -compatible AV Components, Connection Diagram

Page 19

￿   ￿     ￿   ￿  ￿ ￿

Connecting -compatible AV Components

With (Remote Interactive) you can control your DV- CP702 and other -compatible Onkyo AV components together. With some Onkyo AV receivers you can use one remote controller to control all your Onkyo components, and

use the following special functions:

Auto Power On

If your DV-CP702 is connected to an -compatible Onkyo AV receiver, when you turn on the DV-CP702, the AV receiver will turn on and select the DV-CP702 as the input source.

Auto Source Select

Auto Power Off

When you set any -compatible Onkyo AV receiver to

Standby, all other AV components connected via enter Standby as well.

Dimmer

When you dim the display brightness on an -compatible Onkyo AV component, the displays on all other AV compo-

nents connected via are dimmed as well.

See the manuals supplied with your other -compatible AV components for more information.

If your DV-CP702 is connected to an -compatible Onkyo

AV receiver, when you start playback on the DV-CP702, the

AV receiver will select the DV-CP702 as the input source.

Connection Diagram

To use the functions, you need to connect one of the DV-CP702’s connectors to an connector on another AV

component by using an cable. An cable is supplied with all -compatible Onkyo CD players, DVD players, and cassette recorders.

Onkyo AV receiver

Connecting several -compatible

Onkyo AV components

L

R

ANALOG

INPUT

OPTICAL

CONTROL

Onkyo AV receiver

 

REMOTE

 

 

 

REMOTE

 

 

CONTROL

DIGITAL

 

 

INPUT

 

 

 

 

connector

To use you must also make an analog RCA/phono connection between your DV-CP702 and Onkyo AV receiver, even if they are connected digitally.

DV-CP702 DVD Changer

connector

Onkyo cassette

cablerecorder (Supplied)

Y

VIDEO OUTPUT

 

 

PB

PR

OPTICAL

COAXIAL

 

 

S VIDEO

 

AUDIO

 

 

 

OUTPUT

 

 

 

 

DIGITAL

COMPONENT

VIDEO

 

 

L

 

 

REMOTE

DVD CHANGER

 

 

MODEL NO. DV-CP702

AUDIO

 

CONTROL

OUTPUT

ANALOG

R

Disconnect the power cord before making any connections!

Notes:

Push the plugs in all the way to make a good connection.

Use only cables for connections.

To use you must also make an analog RCA/phono connection between your DV-CP702 and Onkyo AV receiver, even if they are connected digitally.

The DV-CP702 has two connectors. You can connect either one to your Onkyo AV receiver. The other connector is for connecting additional -compatible components.

Connect the DV-CP702’s connector to only Onkyo AV components. Connecting to other manufacturer’s AV com- ponents may cause them to malfunction.

Some Onkyo -compatible AV components may not support the special functions described above.

19

Image 19
Contents DV-CP702 Contents Important Safety Instructions For models having a power cord with a polarized plug PrecautionsSur les modèles dont la fiche est polarisée Region Numbers WarrantyPower Installing this UnitDV-CP702 Features Supplied AccessoriesIntroduction DVD Region Numbers Supported Discs Unsupported DVD FeaturesDisc Content Organization Introduction Disc NotesHandling Discs Cleaning DiscsIntroduction Video CDsStoring Discs DV-CP702-related TerminologyCopyright Front Panel Controls & ConnectorsControls & Connectors Display Power cord Controls & Connectors Rear PanelControls & Connectors Remote Controller Controls & Connectors Battery compartment Close the battery compartment Before Using the DV-CP702Open the battery compartment, as shown Accordance with the polarity diagram insideOptical Digital Inputs Connecting the DV-CP702AV Cables & Connectors Before Making Any ConnectionsConnect the DV-CP702 to your TV as shown Connecting the DV-CP702 Connecting Your TV or ProjectorTurn off the DV-CP702 and your TV, and dis LetsDigital Connection Connecting the DV-CP702 Connecting Your Hi-Fi AmpConnecting for Dolby Digital or DTS Analog ConnectionConnection Diagram Connecting -compatible AV ComponentsPowering Up the DV-CP702 Powering Up & Setting Up the DV-CP702First Time Setup Loading & Removing Discs Basic PlaybackLoading Discs During Playback Basic Playback Starting, Pausing & Stopping PlaybackSelecting Discs               Load and select a DVD-Video disc Navigating Disc MenusOr Video CD Ton to start playback of the speci Selecting Titles & Chapters by NumberUse the number buttons to specify a chapter or title Press the Play or Enter butUsing the Disc Navigator To start memory playback, press Basic Playback Memory Playback in the Disc NavigatorWith the Disc Navigator open, press the Memory button Playlist appears in place of the file informationFast Forward & Reverse Selecting Tracks by NumberSlow-motion Playback Adjusting the Display BrightnessFrame-by-Frame Playback Using Chain Mode Using Jpeg CDsLocating Specific Points in Time Advanced PlaybackRepeat Playback Random Playback Advanced PlaybackMemory Playback Selecting Camera Angles Selecting Languages & Audio Formats Using Progressive ScanningSelecting Subtitles Using Last Memory Press the Display button again To cancel the information displayAdvanced Playback Displaying Information During playback, press the DISConfiguring the DV-CP702 Menu Setting Description PicturePicture Menu Using the Onscreen Setup MenusTV Shape PAL Output Setting Australian model only Interlaced SettingProgressive Setting Dynamic Range Control Dolby Digital only Configuring the DV-CP702 Audio MenuLanguage Menu Digital OutDisplay Menu Parental Lock Operation Setting MenuScreen Saver Pause/StillSelecting Other Languages Language Code ListInitial Setup Menu Auto Power OffTroubleshooting Troubleshooting Component Video SpecificationsOnkyo U.S.A. Corporation